CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Multiphase mass balance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 6, 2008, 13:37
Default Multiphase mass balance
  #1
GZD
Guest
 
Posts: n/a
I am running a two-phase flow analysis (water with Nitrogen 78% N2 by volume) It appears that The residuals converge quite well, but the mass flow balance is always very different, i.e. Min = 100 lb/s Mout = 1 lb/s. Any ideas why the mass balance has such a hard time let me know
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to check Heat Balance in heat transfer like mass balance for flow mahendra OpenFOAM Post-Processing 15 February 8, 2012 11:19
mass balance novice FLUENT 0 March 21, 2006 03:33
Mass balance HP FLUENT 1 August 10, 2005 03:52
mass balance Neser CFX 6 February 14, 2004 01:29
HOL // Mass balance Mehdi BEN ELHADJ Phoenics 0 September 4, 2000 14:56


All times are GMT -4. The time now is 16:24.