CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

spray angle calculation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 7, 2008, 22:10
Default spray angle calculation
  #1
Jay
Guest
 
Posts: n/a
Hi...

In the Huh's model, spray angle is calculated automatically.

There is equations about spray angle in the methodology.

but nothing about the time scale of wave growth(Tau w).

I cannot get the exact spray angle.

anyone give me hint?? plz

thanks~
  Reply With Quote

Old   August 13, 2008, 10:34
Default Re: spray angle calculation
  #2
Andrea
Guest
 
Posts: n/a
In Huh's atomization model you have:
Atomization-time-scale = C3 * Turbulent-time-scale + C4 * Wave-growth-time-scale.
This latter is computed as ((ro*ro_fuel/(ro+ro_fuel)^2)*(cd/Lw)^2-sigma_f/((ro+ro_fuel)*Lw^3))^(-0.5)
where ro = density (air has no subscript), cd = fluid velocity at injector outlet, Lw = C1/C2 * Turbulent-legth-scale(time varying...!). I think it's pretty complicated to have all the data to verify the code computation...if you want I can give you values of costant C1,2,3,4...
Bye
Andrea
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
spray with crank angle plot... some body ..help me srinivasulu FLUENT 0 January 28, 2009 06:26
Spray Ricky CD-adapco 5 August 12, 2004 19:45
DPM spray angle David FLUENT 0 December 8, 2003 06:45
spray Davide Main CFD Forum 0 November 5, 2003 10:20
Spray bharath Main CFD Forum 0 November 18, 2002 12:22


All times are GMT -4. The time now is 19:49.