CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   How to convert model from Gambit to Star CD ? (http://www.cfd-online.com/Forums/cd-adapco/56795-how-convert-model-gambit-star-cd.html)

Jimmy September 14, 2008 11:55

How to convert model from Gambit to Star CD ?
 
focousing on unconstructed grid how to convert the model from Gambit to Star CD ? use (*.igs) or (*.neu ) ? or another way can be done? thank you for help.


BastiL September 14, 2008 14:25

Re: How to convert model from Gambit to Star CD ?
 
Well why do you want to convert surfaces? They are hard to handle in star. Better convert surface mesh.

Jimmy September 14, 2008 19:50

Re: How to convert model from Gambit to Star CD ?
 
so you recommend (*.neu)? but I sitll don't know how to do it(the process)?

Esti Armendariz September 16, 2008 04:59

Re: How to convert model from Gambit to Star CD ?
 
Hi there, here is the process:

In gambit: Solver -> Generic File -> Export -> Mesh (Assign a file name, *.neu)

In Star-CD: Write the following command: gambit *.neu

I hope this helps.

Jimmy September 16, 2008 10:07

Re: How to convert model from Gambit to Star CD ?
 
God blessing! thank you.I have done it for your help .thanks a lot really.


All times are GMT -4. The time now is 03:35.