CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

No pressure increase with compressing piston

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 23, 2008, 05:51
Default No pressure increase with compressing piston
  #1
Erik
Guest
 
Posts: n/a
Hi all, I need some help concerning an engine simulation. I have made a simulation from a DI engine, where a slice of a piston has to compress the in-cylinder air. With an event file I've created the moving mesh by removing cell layers. When I use the 'mesh preview run', everything works well and the piston is 'moving'. But when I do a 'normal' run, the air above the piston does not show any pressure or temperature increase.

Does it has something to do with the boundary conditions? The walls of the slice are defined as Wall boundary conds, as well as the piston surface and the cylinder head. I hope someone can help!

Erik
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to increase "Newton Pressure Iteration Limit" kus CFX 9 April 21, 2013 01:54
why does the pressure increase in piston case?? sweetcherry FLUENT 2 June 30, 2008 10:13
Total pressure increase in the diverging duct shiv CD-adapco 3 February 1, 2008 04:39
back pressure of the piston sachin Main CFD Forum 0 April 7, 2006 02:06
Increase of the total pressure ???!!!! Karim LOUESLATI CD-adapco 3 December 19, 2001 11:12


All times are GMT -4. The time now is 07:36.