import volume mesh from CCM+

January 9, 2009, 04:07

is it possible to export volumesh created in star-ccm+ and import in star-cd v4?

January 9, 2009, 06:23

How about exporting as *.dbs file from CCM+ and importing into star cd.

January 9, 2009, 07:06

just export the mesh from Star-CCM in *.ccm format. Star-CD can read that format.

January 9, 2009, 13:06

Yes it is possible to export the mesh from StarCCM+ and then import to STAR-CD 4 Version.

But about dbs file I am not confirmed, but I think it is possible to import the dbs file from starCCM+ in STAR-CD.

January 9, 2009, 15:01

dbs only works for surface meshes!

January 11, 2009, 22:52

yes, dbs only works with surfaces. Polly, you said v4 can read ccm format? how do i read ccm in v4? resume model or is there a procedure to do it?

January 12, 2009, 02:51

rccm

January 12, 2009, 09:42

Or, if you like the GUI:

Grids -> Import Grids -> Format CCM

January 12, 2009, 21:36

thanks, i will try! funny, i couldn't find this in the user guides or manuals!

January 13, 2009, 05:21

True, but to be fair to Star-CD, you have to admit that looking for grid import in the GUI under 'Grid -> Import Grids' does not require an awful lot of abstract thinking.

But you are right, it is sometimes not easy to find the appropriate command or menu.

January 13, 2009, 19:13

yes i'm a idiot who somehow this time tended to RTM instead of flipping buttons around at obvious place! i wonder why i went this approach this time. thanks for the tip though.

January 9, 2009, 04:07	import volume mesh from CCM+	#1
star Guest Posts: n/a	is it possible to export volumesh created in star-ccm+ and import in star-cd v4?

January 9, 2009, 06:23	Re: import volume mesh from CCM+	#2
boffin Guest Posts: n/a	How about exporting as *.dbs file from CCM+ and importing into star cd.

January 9, 2009, 07:06	Re: import volume mesh from CCM+	#3
Polly Eda Guest Posts: n/a	just export the mesh from Star-CCM in *.ccm format. Star-CD can read that format.

January 9, 2009, 13:06	Re: import volume mesh from CCM+	#4
Mangesh Guest Posts: n/a	Yes it is possible to export the mesh from StarCCM+ and then import to STAR-CD 4 Version. But about dbs file I am not confirmed, but I think it is possible to import the dbs file from starCCM+ in STAR-CD.

January 9, 2009, 15:01	Re: import volume mesh from CCM+	#5
Balduin Bankerotti Guest Posts: n/a	dbs only works for surface meshes!

January 11, 2009, 22:52	Re: import volume mesh from CCM+	#6
star Guest Posts: n/a	yes, dbs only works with surfaces. Polly, you said v4 can read ccm format? how do i read ccm in v4? resume model or is there a procedure to do it?

January 12, 2009, 02:51	Re: import volume mesh from CCM+	#7
Balduin Bankerotti Guest Posts: n/a	rccm

January 12, 2009, 09:42	Re: import volume mesh from CCM+	#8
Polly Eda Guest Posts: n/a	Or, if you like the GUI: Grids -> Import Grids -> Format CCM

January 12, 2009, 21:36	Re: import volume mesh from CCM+	#9
star Guest Posts: n/a	thanks, i will try! funny, i couldn't find this in the user guides or manuals!

January 13, 2009, 05:21	Re: import volume mesh from CCM+	#10
Polly Eda Guest Posts: n/a	True, but to be fair to Star-CD, you have to admit that looking for grid import in the GUI under 'Grid -> Import Grids' does not require an awful lot of abstract thinking. But you are right, it is sometimes not easy to find the appropriate command or menu.

January 13, 2009, 19:13	Re: import volume mesh from CCM+	#11
star Guest Posts: n/a	yes i'm a idiot who somehow this time tended to RTM instead of flipping buttons around at obvious place! i wonder why i went this approach this time. thanks for the tip though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
import mesh from CFX	george	FLUENT	8	February 6, 2019 03:43
How to import the PRO/E geometry negative volume	Flavio	CFX	4	October 18, 2006 15:25
Mesh IMPORT	tuks	CFX	4	August 25, 2005 02:28
import mesh in CFX	Babu	CFX	4	February 11, 2005 05:36
Mesh import	kvbswamy	CFX	2	June 27, 2001 15:14