CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   mass flow rate in STAR CD V3.26 (https://www.cfd-online.com/Forums/siemens/56947-mass-flow-rate-star-cd-v3-26-a.html)

Paolo January 15, 2009 07:21
mass flow rate in STAR CD V3.26
 
Hello I am modeling a combustion chamber in Star CD V3.26. I want to find out the mass flow rate on different planes of the chamber and on symmetry planes. Reply will be appriciated. Regards, Paolo

tom January 15, 2009 10:13
Re: mass flow rate in STAR CD V3.26
 
Do a section slice where you want the mass flow. then getc,all,dens$integrate cset. The last column of the output is mass flowrate.

tom

Paolo January 15, 2009 13:12
Re: mass flow rate in STAR CD V3.26
 
Thank you so much Tom. If you can help me again, I want to find out the swirl number on different planes of the chamber. Is it possible to do in STAR? thanks Paolo

Balduin Bankerotti January 15, 2009 16:36
Re: mass flow rate in STAR CD V3.26
 
you will find the macro somewhere at

www.adapco-online.com


All times are GMT -4. The time now is 06:44.