CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

baffle and wall BC in v4.06

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 16, 2009, 04:43
Default baffle and wall BC in v4.06
Posts: n/a
Hi! I'm seeing strange results in a model with baffle and walls. One region set as adiabatic wall (region 0), another regions set as fixed temperature wall (483 K), in between is a adiabatic baffle. Further somewhere, there is an inlet velocity (343 K). The velocity vectors do not reach the wall because it is blocked by the baffle but somehow the wall surface temperature inside the blocked region become very hot! As if there is heat transfer from the hot wall to the blocked wall. There is no radiation set in this case. Any idea?

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
what different between wall and baffle tipakorn CD-adapco 5 July 25, 2006 03:50
Subroutine and Baffle yong CD-adapco 0 October 28, 2004 08:45
Baffle problem.. mohr76 CD-adapco 0 July 14, 2004 07:37
baffle in use guang ai CD-adapco 3 November 10, 2003 05:51
porosity of baffle raymond CD-adapco 4 April 4, 2002 04:03

All times are GMT -4. The time now is 05:10.