CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Average values from transient result in StarCCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 16, 2009, 08:47
Default Average values from transient result in StarCCM+
  #1
MK
Guest
 
Posts: n/a
In transient case ,I want average scalar values at wall from all timestep. So I could export data to FEA Analysis.

Thanks in advance
  Reply With Quote

Old   January 17, 2009, 23:42
Default Re: Average values from transient result in StarCC
  #2
ping
Guest
 
Posts: n/a
This can have two answers:

1. If you want the average over the whole surface as each timestep, then create an area average report of the scalar then a monitor from that report (change storage from iteration to timestep), then export the monitor at the end of the solve.

2. If you want the average value at each location (cell face or presentation grid) on the wall over the whole run then the only way I can think of is to export a table (create the table from the wall locations or a pres. grid) of values at each time step then write a little program to read each of these and average each location.
  Reply With Quote

Old   January 19, 2009, 10:15
Default Re: Average values from transient result in StarCC
  #3
MK
Guest
 
Posts: n/a
Thanks, I think second option is better
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do i calculate an average result from a transi cfxr CFX 1 April 18, 2008 11:12
Spanwise average in StarCCM+ Subhadeep Gan CD-adapco 3 April 12, 2007 20:46
average values in fluent sankar FLUENT 0 July 11, 2006 22:04
Average values robert CFX 3 December 12, 2005 03:50
How to get average values? pa-Hung FLUENT 5 June 29, 2005 21:47


All times are GMT -4. The time now is 10:50.