CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

HyperMesh x ProStar

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 19, 2009, 10:03
Default HyperMesh x ProStar
  #1
Vinicius
Guest
 
Posts: n/a
Im a new ProStar user and I have large experience using FEA pre-processors. Nowadays I use HyperMesh for FEA and I want to know whats better, considering the relationship between time x Mesh quality: do the superficial mesh on HyperMesh and import on Prostar to generate Volumetric mesh, or generate both (superficial and volumetric) on ProStar.

And what about the tool called wraping, does it faster than closing the surfaces on HyperMesh??

Thanks in advance
  Reply With Quote

Old   January 21, 2009, 05:09
Default Re: HyperMesh x ProStar
  #2
Andrea
Guest
 
Posts: n/a
Use Star-CCM+ to generate the mesh and also for the run...if you really need Star-Cd just import your CCM+ mesh into Star-Cd and run it.
Regards
Andrea
  Reply With Quote

Old   January 21, 2009, 16:30
Default Re: HyperMesh x ProStar
  #3
putin
Guest
 
Posts: n/a
hmmmmmmmmmm

hypermesh it the top mesher On FEA.

in cfd the things are a little different, the solvers many times can work only with their own mesh, this is due to the fact that the cfd companies start working at the same time to several places on earth, so they create solvers for their mesh, we are working with hypermesh only when we need to have also hyperstudy, this is a very good reason to work with hypermesh/study, you can make very good optimization, for only cfd just take an hour to make the tutorials and then you will be able to mesh anything.

cu
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hypermesh guido_adriaensen OpenFOAM Meshing & Mesh Conversion 26 September 16, 2008 08:50
hypermesh. Venkata Satyanand Main CFD Forum 0 February 21, 2008 14:49
hypermesh and CFX garywang CFX 2 April 24, 2005 20:20
how about Hypermesh software Kulasekharan FLUENT 4 October 15, 2004 11:51
Hypermesh used for Fluent ?? Boris FLUENT 2 January 27, 2003 22:05


All times are GMT -4. The time now is 19:59.