|February 17, 2009, 02:02||
Problem with compressible flow in Star CD 3.26
I am using star CD for simulating compressible flow.I have two inlet and one outlet. Out of two inlets one is mass inlet while other is pressure inlet. Outlet is pressure outlet. I am not using stagnation or environmental pressure boundary for my problem.
I have defined ULR as given below: for u,v,w: 0.4
I have got residuals below 10 -3. After post processing i found that velocity and pressure contour ok.but at boundary temperature is very high compared to given boundary value. I have problem with temperature convergence.please can anybody suggest me to eliminate temperature problem?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Convergence problem with compressible flow||S.B.J.||CD-adapco||2||January 7, 2009 04:29|
|Need help with a compressible flow problem||JP||FLUENT||0||August 19, 2008 13:11|
|Convergence problem for compressible flow||Saad||Main CFD Forum||2||June 5, 2005 15:24|
|Compressible flow problem||Lewis||FLUENT||2||July 11, 2004 07:29|
|Compressible flow computation with STAR||Veera||CD-adapco||0||June 19, 2004 04:31|