CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

how to export a mesh from star design to star cd

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 3, 2009, 13:48
Default how to export a mesh from star design to star cd
  #1
aounallah
Guest
 
Posts: n/a
hello all,

I will be very gratful if someone can show the procedure to export a mesh from stra design to star cd prostar

many thanks
  Reply With Quote

Old   March 3, 2009, 13:50
Default Re: how to export a mesh from star design to star
  #2
aounallah
Guest
 
Posts: n/a
hell all,

I will be very grateful if someone can show me the procedure to export a mesh from star design to star cd prostar

many thanks

  Reply With Quote

Old   March 4, 2009, 08:22
Default Re: how to export a mesh from star design to star
  #3
vamos1
Guest
 
Posts: n/a
There are several ways to do that. One is using the dbs with proam:

1. Create a (Volume-) mesh within Star-Design 2. Save the Stardesign-case. This will create a *.dbs -File (amoung others) 3. copy the *.dbs -File as star.dbs into a new working directory 4. Star ProStar/proam 5. In the dbs-entries you will find the surface-mesh and the volume-mesh to work on.

  Reply With Quote

Old   March 4, 2009, 13:31
Default Re: how to export a mesh from star design to star
  #4
aounallah
Guest
 
Posts: n/a
hi Vamos1,

thank you your guide to get a mesh in star Cd from star design, I do'nt understand how to do the 5 step ( I'm a fluent user but not yet familiarised with star cd )

you say in the 5 step: In the dbs-entries you will find the surface-mesh and the volume-mesh to work on].

would you please be more explicit

  Reply With Quote

Old   March 6, 2009, 07:22
Default Re: how to export a mesh from star design to star
  #5
vamos1
Guest
 
Posts: n/a
Star uses a *.dbs-File like a database where you can hold different stages or kinds of meshes (surface-meshes, volume-meshes, BLs etc.). You can operate on this database-File via proam and/or via commands (see the dbas-Command). The easiest way is probably to use the proam-GUI:

- start proam in the dir where the dbs-File is located (for ease renam the dbs-File to star.dbs before) - open the proam-Panel (advanced/auto-mesh classic in the menue) - klick on processTool/database summary -> you will see all database-entries in the dbs-File (maybe you have to klick on "refresh" once - you get read in the respective database entry by selecting the entry in the upper area of the proam-GUI and klick "load/get current database.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem wih MESh in Star Design Waseem Siddique CD-adapco 3 January 28, 2009 08:19
mesh from Star design and use in FLUENT?? Waseem Main CFD Forum 0 December 17, 2008 07:25
Mesh from Star Design in FLUENT Waseem CD-adapco 0 December 17, 2008 07:24
hi how to do variable mesh in star-design kathir CD-adapco 1 June 27, 2006 15:50
Mesh export from pro-STAR to STAR-CCM+ Rostislav CD-adapco 1 November 25, 2005 15:07


All times are GMT -4. The time now is 15:30.