CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Trimming and Mapping Methods with ES-ICE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 2, 2009, 14:16
Question Trimming and Mapping Methods with ES-ICE
  #1
New Member
 
Flavio Zancanaro
Join Date: Apr 2009
Posts: 2
Rep Power: 0
Zancanaro is on a distinguished road
Dear People
I’m trying to do a simulation of an ASTM CFR engine using the “Method Mapping (es-ice)” and I am with a lot of difficulty to finish it.
When finishing the mapping stage I accomplished the verification of negative volumes in the mesh and the result is zero negative volumes, but when I do the verification for the “Create Result – (es-ice)” appear several negative volumes.
Can anybody help me about the method mapping?
Another doubt, when I do for the trimming method mistake happens at the moment of cutting the port, because that?
I have the geometry of the engine, if you could help me I can send by e-mail.
Regards
Flavio Zancanaro
Zancanaro is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 01:17.