CFD Online Discussion Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Fluid-Structure-Interaction using Star-CD / Star-CCM+ and ABAQUS (https://www.cfd-online.com/Forums/siemens/65127-fluid-structure-interaction-using-star-cd-star-ccm-abaqus.html)

anunu November 20, 2014 00:12
Dear All,
STAR-CD did not accept the file created by Fluent, but STAR-CCM+ provide the import function with cas file of Fluent. The mesh and Boundary condition in CAS file can be compatible with STAR-CCM+.
Another, you can directly use Co-simulation using the SIMULIA Co-simulation Engine (CSE) with Fluent.
The detail information can be found in Abaqus website, http://www.3ds.com/support/certified...co-simulation/

baojian December 25, 2018 20:57
Quote:
Originally Posted by step (Post 227289)
According to the Star-CD (v4.10) documentation "loosely coupling" between Star-CD and ABAQUS is possible. For me that seems to be a one-way coupling as flow data is mapped onto a surface in ABAQUS. To achieve a fully coupled, transient simulation, MPCCI seems to be the proper way to proceed.
Does anyone has any experience in using MPCCI coupling for STAR-CD and ABAQUS? Is it a straight forward procedure or a rather tricky way to get (unreliable) results?
I depend on using STAR-CD and ABAQUS as other software products are not available for me.
now,star ccm+ abaqus co-simulation can achieve two-ways fluid-structrue interaction

baojian December 26, 2018 05:28
Quote:
Originally Posted by JohnE-CFD (Post 516853)
Dear All,

I am seeking an individual to run FSI analysis for me with Abaqus and StarCCM+. I am currently handling a project for my company and have not had time to run these simulations myself and I actually don't have access to the software at my current location.

I will provide all the raw data you will need to run it, all I require is the report. This is more of an academic work, not industry based. I will pay for such service. You can contact me for further discussion if you are interested.

Cheers
recently，I am doing corresponding FSI work based on co-simulation starccm and abaqus,major in subsea riser


All times are GMT -4. The time now is 21:06.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page