CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

mapping flat surface to curve surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 17, 2009, 09:49
Default mapping flat surface to curve surface
  #1
wei
New Member
 
wei
Join Date: Apr 2009
Posts: 17
Rep Power: 8
wei is on a distinguished road
Do you have any idea how to map a flat surface with tetrahedral cell to a curve surface with hexahedral cell?

There is a small gap between these two surface. What commands should I use?
wei is offline   Reply With Quote

Old   June 23, 2009, 07:49
Default
  #2
Member
 
Anton Lyaskin
Join Date: Mar 2009
Location: Samara, Russia
Posts: 66
Rep Power: 8
A_Lyaskin is on a distinguished road
VPROJECT, I suppose. You'll also need to create shells at "target" surface before using it
A_Lyaskin is offline   Reply With Quote

Old   June 26, 2009, 08:10
Default
  #3
wei
New Member
 
wei
Join Date: Apr 2009
Posts: 17
Rep Power: 8
wei is on a distinguished road
thank you. i use 'vproj' to project the vertices to the surface. it works.
wei is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 23 August 5, 2015 02:09
curve surface problem sianG CFX 0 February 8, 2009 09:52
Normal - Helical Surface m. malik Main CFD Forum 3 February 3, 2006 13:56
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 16:22.