CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

how can i get transient post data file (.ccmt)?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 26, 2010, 07:21
Default how can i get transient post data file (.ccmt)?
  #1
New Member
 
Zhenyao Gu
Join Date: Nov 2010
Posts: 3
Rep Power: 6
okyaoyao25 is on a distinguished road
i have finished the jobscript of "casename.inp" and also other related files that are necessary for the calculation. then i have made a iterationcalculation by cluster. All was ok until the finish of calculation. But now i cannot find the Transient post data file (.ccmt) in the directory. then i can't get the information of calculation for the next post-processing. not that the ccmt should after the calculation automatically generated?

How can i get the ccmt file now, or the information of calculation have not saved at all?
then i must begin a new calculation? then what should i set before the calculation, so finally i can get the ccmt.

thank you

Last edited by okyaoyao25; November 26, 2010 at 08:08.
okyaoyao25 is offline   Reply With Quote

Old   November 29, 2010, 05:53
Default
  #2
New Member
 
Zhenyao Gu
Join Date: Nov 2010
Posts: 3
Rep Power: 6
okyaoyao25 is on a distinguished road
no answer??
who can help me??!!
okyaoyao25 is offline   Reply With Quote

Old   November 29, 2010, 11:43
Default
  #3
Senior Member
 
Pauli
Join Date: Mar 2009
Posts: 181
Rep Power: 8
Pauli is on a distinguished road
You have to ask for transient output/data. The command is wrpost. Or in the NavCenter, look for the Transient tab under Analysis Output.
Pauli is offline   Reply With Quote

Old   December 1, 2010, 06:04
Default
  #4
New Member
 
Zhenyao Gu
Join Date: Nov 2010
Posts: 3
Rep Power: 6
okyaoyao25 is on a distinguished road
thanks a lot.
okyaoyao25 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM 300 October 29, 2014 19:00
1.7.x Environment Variables on Linux 10.04 rasma OpenFOAM Installation 9 July 30, 2010 04:43
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Compilation errors in ThirdPartymallochoard feng_w OpenFOAM Installation 1 January 25, 2009 07:59
ParaView Compilation jakaranda OpenFOAM Installation 3 October 27, 2008 12:46


All times are GMT -4. The time now is 04:31.