CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   not achived convergence data and several error (http://www.cfd-online.com/Forums/cd-adapco/82966-not-achived-convergence-data-several-error.html)

armand December 10, 2010 03:33

not achived convergence data and several error
 
Dear all,
I want to share my problem running with pro-star, my case is about modeling SCR-system. For the first time my problem model in laminar flow, this aim for check the flow, and the result was satisfy. But in the output file I found several warning such as "warning 020=the center of cell 138750 is outside of the cell. This is an indicator of a bad cell, and it can result in poor convergence".
please help me to solve this case...

Thank You for your attention.

ara1362 April 1, 2011 18:50

remove or fix bad cells, I used to use prostar, but has been a long time.
try changing to starccm+ it is much easier to work with


All times are GMT -4. The time now is 06:50.