not achived convergence data and several error

armand · December 10, 2010, 02:33

Dear all,
I want to share my problem running with pro-star, my case is about modeling SCR-system. For the first time my problem model in laminar flow, this aim for check the flow, and the result was satisfy. But in the output file I found several warning such as "warning 020=the center of cell 138750 is outside of the cell. This is an indicator of a bad cell, and it can result in poor convergence".
please help me to solve this case...

Thank You for your attention.

ara1362 · April 1, 2011, 18:50

remove or fix bad cells, I used to use prostar, but has been a long time.
try changing to starccm+ it is much easier to work with

December 10, 2010, 02:33	not achived convergence data and several error	#1
armand New Member armansyah Join Date: Oct 2010 Posts: 2 Rep Power: 0	Dear all, I want to share my problem running with pro-star, my case is about modeling SCR-system. For the first time my problem model in laminar flow, this aim for check the flow, and the result was satisfy. But in the output file I found several warning such as "warning 020=the center of cell 138750 is outside of the cell. This is an indicator of a bad cell, and it can result in poor convergence". please help me to solve this case... Thank You for your attention.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 1, 2011, 18:50		#2
ara1362 New Member ara Join Date: Apr 2011 Posts: 8 Rep Power: 4	remove or fix bad cells, I used to use prostar, but has been a long time. try changing to starccm+ it is much easier to work with