how to setup 3d wind tunnel

bukm · January 13, 2011, 06:37

need help in setting up wind tunnel. do i need to prepare the wind tunnel in a cad software or i can setup in star ccm+?. how to prepare the mesh for the wind tunnel with an object inside it? please help me. i am still new in cfd. regards.

webceo89 · January 13, 2011, 07:59

In Star-CCM+ you dont need do generate the wind tunnel in CAD.

After importing your Testing geometry, you can create a block surface around your body. If you want to model the half windtunnel, you can enter the dimensions of it and then use the function "substract" to receive a closed volume.

bukm · January 14, 2011, 01:47

thanks i will give it a try. if u dont mind, could you please write the steps? thanks.

bukm · January 14, 2011, 02:35

i managed to setup the surface block. however when meshing the block and the object inside the block, the object inside the surface block was lost. how do i define the block to work as a wind tunnel and the object as a solid object in star cmm. please provide some tutorial. i am trying to do the simulation in 3d. Regards

webceo89 · January 14, 2011, 02:45

To help you out in detail, please send me a pm with your email...

bukm · January 14, 2011, 02:55

ok check ur pm.

bukm · January 14, 2011, 03:02

update screenshot

hwsv07 · December 13, 2014, 14:35

can someone help on this?

I faced the same problem.

[QUOTE]
i managed to setup the surface block. however when meshing the block and the object inside the block, the object inside the surface block was lost. how do i define the block to work as a wind tunnel and the object as a solid object in star cmm. please provide some tutorial. i am trying to do the simulation in 3d. Regards
[\QUOTE]

hwsv07 · December 13, 2014, 14:36

can someone help on this?

I faced the same problem.

I have a geometry of my specimen that I want to test. I placed a rectangular block over my specimen and my specimen was lost in the block.

Quote:

Originally Posted by bukm

i managed to setup the surface block. however when meshing the block and the object inside the block, the object inside the surface block was lost. how do i define the block to work as a wind tunnel and the object as a solid object in star cmm. please provide some tutorial. i am trying to do the simulation in 3d. Regards

SB123 · December 13, 2014, 15:06

Quote:

Originally Posted by hwsv07

can someone help on this?

I faced the same problem.

I have a geometry of my specimen that I want to test. I placed a rectangular block over my specimen and my specimen was lost in the block.

check the user manual, for the tutorials see the below link assuming you've installed star in the default location. the below tutorial show's how to do it in great detail.
Tutorial Guide > Motion > Marine Resistance Prediction: KCS Hull with a Rudder > Mesh Generation > Creating the Towing Tank

with that being said, the user manual is your friend, use it for all its worth... it's probably best to start there before you start posting threads on here looking for people to solve your problem for you

January 13, 2011, 06:37	how to setup 3d wind tunnel	#1
bukm New Member bu Join Date: Jan 2011 Posts: 6 Rep Power: 15	need help in setting up wind tunnel. do i need to prepare the wind tunnel in a cad software or i can setup in star ccm+?. how to prepare the mesh for the wind tunnel with an object inside it? please help me. i am still new in cfd. regards.

January 14, 2011, 03:02		#7
bukm New Member bu Join Date: Jan 2011 Posts: 6 Rep Power: 15	update screenshot markus.c.watson@gmail.com likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flow in cyclic wind tunnel	yogesh@cfd	Main CFD Forum	0	November 8, 2010 04:28
how to consider perforated wind tunnel wall in CFD simulation	littlelz	CFX	4	June 11, 2009 05:51
Simulating a GÃ¶ttingen type wind tunnel in FLUENT	Chris	FLUENT	3	December 4, 2006 17:33
Virtual Wind Tunnel in FLUENT	ND	FLUENT	0	April 7, 2006 07:43
Wind tunnel modeling	Pandu	CFX	3	May 19, 2003 21:49

January 13, 2011, 07:59		#2
webceo89 New Member Join Date: Jan 2011 Posts: 3 Rep Power: 15	In Star-CCM+ you dont need do generate the wind tunnel in CAD. After importing your Testing geometry, you can create a block surface around your body. If you want to model the half windtunnel, you can enter the dimensions of it and then use the function "substract" to receive a closed volume.

January 14, 2011, 01:47		#3
bukm New Member bu Join Date: Jan 2011 Posts: 6 Rep Power: 15	thanks i will give it a try. if u dont mind, could you please write the steps? thanks.

January 14, 2011, 02:35		#4
bukm New Member bu Join Date: Jan 2011 Posts: 6 Rep Power: 15	i managed to setup the surface block. however when meshing the block and the object inside the block, the object inside the surface block was lost. how do i define the block to work as a wind tunnel and the object as a solid object in star cmm. please provide some tutorial. i am trying to do the simulation in 3d. Regards

January 14, 2011, 02:45		#5
webceo89 New Member Join Date: Jan 2011 Posts: 3 Rep Power: 15	To help you out in detail, please send me a pm with your email...

January 14, 2011, 02:55		#6
bukm New Member bu Join Date: Jan 2011 Posts: 6 Rep Power: 15	ok check ur pm.

December 13, 2014, 14:35		#8
hwsv07 Member Join Date: Nov 2014 Posts: 88 Rep Power: 11	can someone help on this? I faced the same problem. [QUOTE] i managed to setup the surface block. however when meshing the block and the object inside the block, the object inside the surface block was lost. how do i define the block to work as a wind tunnel and the object as a solid object in star cmm. please provide some tutorial. i am trying to do the simulation in 3d. Regards [\QUOTE]