CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Gravity simulation (http://www.cfd-online.com/Forums/cd-adapco/84247-gravity-simulation.html)

e101533 January 24, 2011 11:48

Gravity simulation
 
Dear All,

I am simulating a vessel being filled up via an inlet at the bottom and exiting at the top. I want to simulate the tank overflowing so have just set the top of the vessel as a flow-split outlet. I am simulating gravity and so have the top of the vessel as the reference point. The flow is turbulent and so I am getting reverse flwo messages at the outlet. To bypass this I have used a mesh extruder to extend the outlet. This has got rid of the reverse flows.
I am wanting to know how much affect this extended geometry has on the rest of the system, as it is extended vertically and so will be affected by gravity.

Regards,

Rhodri


All times are GMT -4. The time now is 03:47.