CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Plotting Parameter vs Angular Position in STAR-CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 13, 2011, 15:46
Default Plotting Parameter vs Angular Position in STAR-CCM+
  #1
New Member
 
Matt Hollins
Join Date: Nov 2010
Posts: 9
Rep Power: 5
Reynolds is on a distinguished road
Hello,

This is a fairly trivial question. I am modelling flow around tyres and want to plot the Cp (on y axis) vs angular position (in degrees) on the x axis. I can only seem to be able to plot axial position however.

Does anyone know a way to do this, or even if this feature exists in STAR?

Best Regards,
Matt

---------------------------------------------------------------------------
I should add that the data in question is read from a plane section that cuts through the mid point of the tyre

Last edited by Reynolds; March 14, 2011 at 07:10.
Reynolds is offline   Reply With Quote

Old   March 14, 2011, 18:47
Default
  #2
Senior Member
 
Pauli
Join Date: Mar 2009
Posts: 178
Rep Power: 7
Pauli is on a distinguished road
Yes it can be done. Query the "y" position in a cylindrical coordinate system.
Pauli is offline   Reply With Quote

Old   March 22, 2011, 10:42
Default
  #3
New Member
 
Matt Hollins
Join Date: Nov 2010
Posts: 9
Rep Power: 5
Reynolds is on a distinguished road
Thanks Pauli.

For those with similar problem, set up a cylindrical co-ord, then go to the plot in question. Under 'X TYPE' select scalar, then under scalar select position/position in cylindrical 1/theta.

I am using star-ccm+ 5.06.010

Matt
Reynolds is offline   Reply With Quote

Reply

Tags
angular plot, plot, plotting, star-ccm+

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
Fluent Vs Star CCM firda Main CFD Forum 3 February 26, 2011 02:51
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
error in star ccm maurizio CD-adapco 3 October 16, 2007 05:17
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 14:01.