CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

set up the boundary condition by using star ccm+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 5, 2011, 09:50
Default set up the boundary condition by using star ccm+
  #1
New Member
 
layth
Join Date: Apr 2011
Posts: 10
Rep Power: 4
layth is on a distinguished road
hello every one

could any one help me to specify the boundary condition for inlet and outlet flow inside turbocharger compressor by using star ccm+ software

I will very happy and grateful if you reply me

warm regards
layth is offline   Reply With Quote

Old   October 8, 2011, 05:49
Default
  #2
New Member
 
Join Date: Aug 2011
Posts: 6
Rep Power: 4
Emara is on a distinguished road
Can you give some more details?

Have you split the boundaries or not? if you have, the next step is to define the inlet boundary as (Velocity inlet or Stagnation inlet) whatever your design is and the same for the exit boundary whether Pressure outlet or Flow-Split.
Emara is offline   Reply With Quote

Old   October 8, 2011, 07:28
Default
  #3
New Member
 
layth
Join Date: Apr 2011
Posts: 10
Rep Power: 4
layth is on a distinguished road
helle sir,

thank you for reply me

I have impeller blade passage for centrifugal compressor i already used the staganation boundary condition for inlet and already used pressure outlet for outlet . what i want to know what is the values for pressure at inlet and outlet.

best regards
layth is offline   Reply With Quote

Old   February 12, 2013, 08:34
Default
  #4
New Member
 
manoj
Join Date: Feb 2013
Posts: 2
Rep Power: 0
manojaero12 is on a distinguished road
i need the inlet condition for turbocharger can anyone help me please
manojaero12 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 1 October 15, 2011 10:53
How to set the Heat Flux boundary condition at Outlet creddy_trddc CFX 3 September 21, 2011 07:44
vorticity boundary condition bearcharge Main CFD Forum 0 May 14, 2010 11:32
how to set up a wall boundary condition according to calculated wall shear stress? gameoverli OpenFOAM Pre-Processing 1 May 21, 2009 08:28
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 15:55


All times are GMT -4. The time now is 23:09.