CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Mesh for Cyclones

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 26, 2011, 11:32
Default Mesh for Cyclones
  #1
New Member
 
Rhodri Jones
Join Date: Jan 2011
Posts: 4
Rep Power: 6
e101533 is on a distinguished road
Dear All,

I am currently simulating a hydrocyclone in starccm+, after reviewing various literature it seems that it is essential to use a structured hexehedral mesh in a polar grid. This mesh is not available in starccm+, only a cartesian grid system can be used with the trimmer hexahedral mesh. Has anyone managed to simulate a validated cyclone simulation on the meshing schemes available on star or is it the case that you generate your mesh on say Gambit and import it.......

Any help is much appreciated.

Rhodri
e101533 is offline   Reply With Quote

Old   November 6, 2011, 06:56
Default
  #2
Senior Member
 
Ping
Join Date: Mar 2009
Posts: 223
Rep Power: 9
ping is on a distinguished road
we have been involved in one cyclone project which successfully used both the trimmed and polyhedral mesh for a cyclone with air and water with the vof model - good correlation when a fine core mesh and small timestep used. i have heard that others have modelled 'normal' cyclones with trimmed mesh in the nuclear industry and got good correlation. keep in mind the publishers of work you read might not have access to the modern meshing tools in star-ccm+ - ie they can use either auto tetrahedrals which needs too many cells and create numerical diffusion or gambit's block meshing - lots more work but a nice mesh compared to tets.
ping is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 39 June 5, 2013 19:02
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
Meshing aifoil in ICEM student123a ANSYS Meshing & Geometry 13 December 8, 2010 11:40
mesh missing after export in gambit morteza08 ANSYS Meshing & Geometry 1 July 26, 2010 01:10
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49


All times are GMT -4. The time now is 21:44.