CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   help to run the engine with user defined fuel (http://www.cfd-online.com/Forums/cd-adapco/99359-help-run-engine-user-defined-fuel.html)

kumar swamy m.c April 2, 2012 03:24

help to run the engine with user defined fuel
 
hello
Is there any one run the engine with user defined fuel using es-ice. In case if you had please suggest what are all changes should be make in star controls and pro-star.

Pauli April 3, 2012 11:00

You will need a dropro.f subroutine to provide the liquid fuel properties and you will need to define the gaseous fuel properties in prostar. If you are using liquid films, you'll also need a subroutine to define the liquid film properties.

I'm not sure about the es-ice part or the prostar-es-ice interaction. (I'm not a regular es-ice user.) I've played with it a few times over the years. It seems to be different each time. Maybe someone else can provide additional details.


All times are GMT -4. The time now is 06:29.