CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFD Freelancers (http://www.cfd-online.com/Forums/cfd-freelancers/)
-   -   CFD services needed (http://www.cfd-online.com/Forums/cfd-freelancers/102838-cfd-services-needed.html)

Lane Young June 4, 2012 08:04

CFD services needed
 
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane

Far June 4, 2012 10:08

Sure, I can do it.

sail June 4, 2012 14:18

Dear Lane,

I'm a Cfd consultant based in Italy. Even if I'm specilized in multiphase and naval architecture CFD (as you can see from the website in my signature), I'm also experienced in performing those kind of simulations.

In particular, I've analyzed the loads on the roof and walls acting on a building, and compared the findings aganist wind tunnel measurements and the British Standard 6399 empirical formulations (equivalent to ASME, I suppose).

I'd be glad to have a chat with you over mail or skype to discuss your requirements and show you my work. Feel free to contact me here on the forum or using the contacts listed on my website.

Best regards

Vieri

premal June 6, 2012 05:05

P M Dimension Engineering Services
 
I am from P M Dimension Pvt Ltd. We are providing CFD Engineering service. We will do your project. If you want can you please contact me my E-mail ID is premal.sheth@pmdimensions.com And Office-+91-7940100309.

morteza08 June 9, 2012 07:27

Quote:

Originally Posted by Lane Young (Post 364620)
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane

Call me
morteza08@gmail.com
That is my profession....

wiating you

rsalemi June 9, 2012 18:07

CFD Services Needed
 
Dear Lane,

I have over 25 years of CFD application experience in a wide variety of engineering industry in UK. I believe I will be able to help you on your project.
If you would like to discuss this further please contact me on my email address salemiramin@aol.com

Thank you.

Dr. Ramin Salemi

cfdengineers June 11, 2012 02:48

Quote:

Originally Posted by Lane Young (Post 364620)
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane

Hi,
We are India based ISO9001:2008 Certified CFD Analysis Services Company having 10+ years of experience in CFD engineering industry. We read your requirements and we are the best suitable for your job. Please contact us at info@cfdanalysisservices.com for brief discussion.

ogusguven June 17, 2012 22:48

Hi,
We are a young company making design oriented experimental fluid mechanics consultancy and CFD analysis in Turkey. I have done a very similar analysis including the static strength of an active solar tracing system interaction with CFD wind load calculations as a part of an applied project in my masters studies. I can help you with your problem,further we can help you to find comparitively more affordable wind tunnel studies if you want to validate the results. Validation can be via an institution accredited in US. Prices are comparitively affordable from Europe and US.
If you are interested contact from this forum or
Mail: guven@inpetusproje.com
I would be glad to make a talk from e-mail or videochat
Sorry my website does not have an English version yet.

Hope to hear from you.

Solv-numerics August 1, 2012 14:27

Welcome to Solv numerics
 
We are an engineering services company based out in India.

We have handled similar projects in the near past. You can find more on our strengths and capabilities from our website www.solv-numerics.com

Look forward to hear from you.

Thanks
Murthi

email: murthi.kn@solv-numerics.com

Shivamtech Engineering October 26, 2012 11:18

Hello,

We can do this Project.

We have a Team of experienced CFD Engineers working in our Company.


Thanks.
Manoj Bhat
manoj@shivamtech.com

Shivamtech Engineering Design Pvt.Ltd.
501, Western Court, Opp. E-Square Multiplex,
Ganeshkhind Road, Pune-411016 INDIA
Mob : +91 9011058126
Tel: +91 20 2565 1715
Skype: shivamengineering

www.shivamtech.com

mehul.074 April 1, 2013 06:28

CFD Service Provider
 
PM DIMENSIONS (PMD) has filled the void by providing organizations with an opportunity to outsource and offshore CFD services to locations where skilled and cost-effective manpower exists in abundance. Our team, led by globally recognized experts, has access to the latest computing resources that would be
cost prohibitive for organizations to invest in, purely for their internal engineering servicesí needs.



PM DIMENSIONS PVT LTD
102-103, IT Tower 3, Infocity, Gandhinagar, Gujarat, India
Ph: +91 79 40100310 | +91 79 40100309
E-mail ID:mehul.sathwara@pmdimensions.com
www.pmdimensions.com

dklastiwka April 26, 2013 06:48

I run a consulting company based in Canada, Gray Matter Engineering Inc. (www.graymattereng.com). I would be happy to take a look at your problem and let you know what can be done.

I have a masters degree in mechanical engineering with a specialization in CFD of turbomachinery. My linkedin profile with my work history can be found here:

ca.linkedin.com/in/dklastiwka/

I have also passed the NCEES PE exam so I could obtain Professional Engineering Acceeditation in the US if needed.

Feel free to contact me at dlastiwka@graymattereng.com with any questions or to discuss your problem.

Regards,

Fluidengineer April 26, 2013 07:19

Good morning everybody
RGBSI is specialised in cfd services. You can contact Mr john gelmisi
Director business development. His contact no is 2487610494. Email jg@rgbsi.com

chetanD April 27, 2013 20:21

Dear Lane,
We are a team of consultants with core expertise in CFD Modeling. Over the last 10 years we have actively worked on using CFD to solve problems for various industries. A number of our senior consultants are Ex-ANSYS employees.
We have worked on similar problem to predict wind load under different wind conditions using CFD. We are based out of San Anotnio, Texas and will be happy to discuss more details with you. Please contact us info@tridiagonal.us for brief discussion. Please visit www.tridiagonal.com to find more information about our company.
Regards,
Chetan Dharmadhikari

Hannes_Kiel April 28, 2013 04:27

If your still interested, drop me a note at hannes@fluidengsol.com. We've got ten years of aeordynamics background (CFD & experimental) in industrial and sports applications.

Best Regards,
Hannes Renzsch
FluidEngineeringSolutions

Mehul Patel July 25, 2013 03:01

We are CFD Analysis Consulting Services Provider
 
Hello,


HiTech CFD offers consulting services that apply to various spectrum of CFD analysis. Before starting your CFD Analysis project we create CAD geometry and develop an excellent quality mesh representation.


We are done many project for CFD modeling. We are happy to do your project. For more information and discuss more details, Please contact us info@hitechcfd.com or visit our CFD services http://www.hitechcfd.com/cfd-analysis-services.html

Filankes September 18, 2013 10:36

I am highly itnerested, and sent PM to you.


All times are GMT -4. The time now is 02:48.