CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > CFD Freelancers

CFD services needed

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By Lane Young

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 4, 2012, 09:04
Post CFD services needed
  #1
New Member
 
Lane
Join Date: Jun 2012
Posts: 1
Rep Power: 0
Lane Young is on a distinguished road
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane
Mehul Patel likes this.
Lane Young is offline   Reply With Quote

Old   June 4, 2012, 11:08
Default
  #2
Far
Super Moderator
 
Sijal
Join Date: Mar 2009
Location: Islamabad
Posts: 4,553
Blog Entries: 6
Rep Power: 54
Far has a spectacular aura aboutFar has a spectacular aura about
Send a message via Skype™ to Far
Sure, I can do it.
Far is offline   Reply With Quote

Old   June 4, 2012, 15:18
Default
  #3
Senior Member
 
sail's Avatar
 
Vieri Abolaffio
Join Date: Jul 2010
Location: Always on the move.
Posts: 308
Rep Power: 16
sail is on a distinguished road
Dear Lane,

I'm a Cfd consultant based in Italy. Even if I'm specilized in multiphase and naval architecture CFD (as you can see from the website in my signature), I'm also experienced in performing those kind of simulations.

In particular, I've analyzed the loads on the roof and walls acting on a building, and compared the findings aganist wind tunnel measurements and the British Standard 6399 empirical formulations (equivalent to ASME, I suppose).

I'd be glad to have a chat with you over mail or skype to discuss your requirements and show you my work. Feel free to contact me here on the forum or using the contacts listed on my website.

Best regards

Vieri
__________________
http://www.leadingedge.it/
Naval architecture and CFD consultancy
sail is offline   Reply With Quote

Old   June 6, 2012, 06:05
Default P M Dimension Engineering Services
  #4
New Member
 
Premal Sheth
Join Date: Jun 2012
Location: Ahmadabad, Gujarat, India
Posts: 27
Rep Power: 13
premal is on a distinguished road
Send a message via Yahoo to premal Send a message via Skype™ to premal
I am from P M Dimension Pvt Ltd. We are providing CFD Engineering service. We will do your project. If you want can you please contact me my E-mail ID is premal.sheth@pmdimensions.com And Office-+91-7940100309.
premal is offline   Reply With Quote

Old   June 9, 2012, 08:27
Default
  #5
Senior Member
 
morteza08's Avatar
 
Morteza
Join Date: May 2010
Location: Iran,Islamic Republic of
Posts: 161
Rep Power: 15
morteza08 is on a distinguished road
Quote:
Originally Posted by Lane Young View Post
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane
Call me
morteza08@gmail.com
That is my profession....

wiating you
morteza08 is offline   Reply With Quote

Old   June 9, 2012, 19:07
Default CFD Services Needed
  #6
New Member
 
Ramin Salemi
Join Date: Jun 2012
Posts: 1
Rep Power: 0
rsalemi is on a distinguished road
Dear Lane,

I have over 25 years of CFD application experience in a wide variety of engineering industry in UK. I believe I will be able to help you on your project.
If you would like to discuss this further please contact me on my email address salemiramin@aol.com

Thank you.

Dr. Ramin Salemi
rsalemi is offline   Reply With Quote

Old   June 11, 2012, 03:48
Default
  #7
New Member
 
Nik Jones
Join Date: Jun 2012
Posts: 1
Rep Power: 0
cfdengineers is on a distinguished road
Quote:
Originally Posted by Lane Young View Post
Good morning everybody,
I am located in upstate NY. I am i need of a professional engineer or firm that can run some CFD on a design that i have come up with to determine the wind pressure +/- on a Solar racking system. I have had a PE run the ASCE method 1,2,3 on the design already. However he feels that the results are not accurate. He has suggested that a CFD or wind tunnel testing would be the next step. please respond to this if you can provide this service.

thank you,
Lane
Hi,
We are India based ISO9001:2008 Certified CFD Analysis Services Company having 10+ years of experience in CFD engineering industry. We read your requirements and we are the best suitable for your job. Please contact us at info@cfdanalysisservices.com for brief discussion.
__________________
CFD Analysis
cfdengineers is offline   Reply With Quote

Old   June 17, 2012, 23:48
Default
  #8
New Member
 
Guven Ogus
Join Date: Jun 2012
Posts: 1
Rep Power: 0
ogusguven is on a distinguished road
Hi,
We are a young company making design oriented experimental fluid mechanics consultancy and CFD analysis in Turkey. I have done a very similar analysis including the static strength of an active solar tracing system interaction with CFD wind load calculations as a part of an applied project in my masters studies. I can help you with your problem,further we can help you to find comparitively more affordable wind tunnel studies if you want to validate the results. Validation can be via an institution accredited in US. Prices are comparitively affordable from Europe and US.
If you are interested contact from this forum or
Mail: guven@inpetusproje.com
I would be glad to make a talk from e-mail or videochat
Sorry my website does not have an English version yet.

Hope to hear from you.
ogusguven is offline   Reply With Quote

Old   August 1, 2012, 15:27
Default Welcome to Solv numerics
  #9
New Member
 
Solv-numerics's Avatar
 
Murthi KN
Join Date: Aug 2012
Posts: 10
Rep Power: 13
Solv-numerics is on a distinguished road
We are an engineering services company based out in India.

We have handled similar projects in the near past. You can find more on our strengths and capabilities from our website www.solv-numerics.com

Look forward to hear from you.

Thanks
Murthi

email: murthi.kn@solv-numerics.com
Solv-numerics is offline   Reply With Quote

Old   October 26, 2012, 12:18
Default
  #10
New Member
 
Manoj
Join Date: Oct 2012
Posts: 5
Rep Power: 13
Shivamtech Engineering is on a distinguished road
Hello,

We can do this Project.

We have a Team of experienced CFD Engineers working in our Company.


Thanks.
Manoj Bhat
manoj@shivamtech.com

Shivamtech Engineering Design Pvt.Ltd.
501, Western Court, Opp. E-Square Multiplex,
Ganeshkhind Road, Pune-411016 INDIA
Mob : +91 9011058126
Tel: +91 20 2565 1715
Skype: shivamengineering

www.shivamtech.com
Shivamtech Engineering is offline   Reply With Quote

Old   April 1, 2013, 07:28
Default CFD Service Provider
  #11
New Member
 
mehul
Join Date: Jul 2012
Posts: 7
Rep Power: 13
mehul.074 is on a distinguished road
PM DIMENSIONS (PMD) has filled the void by providing organizations with an opportunity to outsource and offshore CFD services to locations where skilled and cost-effective manpower exists in abundance. Our team, led by globally recognized experts, has access to the latest computing resources that would be
cost prohibitive for organizations to invest in, purely for their internal engineering services’ needs.



PM DIMENSIONS PVT LTD
102-103, IT Tower 3, Infocity, Gandhinagar, Gujarat, India
Ph: +91 79 40100310 | +91 79 40100309
E-mail ID:mehul.sathwara@pmdimensions.com
www.pmdimensions.com
mehul.074 is offline   Reply With Quote

Old   April 26, 2013, 07:48
Default
  #12
New Member
 
dklastiwka's Avatar
 
Derek Lastiwka
Join Date: Feb 2010
Location: Calgary, Alberta, Canada
Posts: 26
Rep Power: 16
dklastiwka is on a distinguished road
I run a consulting company based in Canada, Gray Matter Engineering Inc. (www.graymattereng.com). I would be happy to take a look at your problem and let you know what can be done.

I have a masters degree in mechanical engineering with a specialization in CFD of turbomachinery. My linkedin profile with my work history can be found here:

ca.linkedin.com/in/dklastiwka/

I have also passed the NCEES PE exam so I could obtain Professional Engineering Acceeditation in the US if needed.

Feel free to contact me at dlastiwka@graymattereng.com with any questions or to discuss your problem.

Regards,
__________________
Derek Lastiwka
Mechanical & Fluids Engineer
dlastiwka@graymattereng.com
Gray Matter Engineering Inc.
dklastiwka is offline   Reply With Quote

Old   April 26, 2013, 08:19
Default
  #13
New Member
 
Kiran
Join Date: Apr 2013
Location: bangalore
Posts: 6
Rep Power: 12
Fluidengineer is on a distinguished road
Good morning everybody
RGBSI is specialised in cfd services. You can contact Mr john gelmisi
Director business development. His contact no is 2487610494. Email jg@rgbsi.com
Fluidengineer is offline   Reply With Quote

Old   April 27, 2013, 21:21
Default
  #14
New Member
 
chetan
Join Date: Aug 2010
Posts: 5
Rep Power: 15
chetanD is on a distinguished road
Dear Lane,
We are a team of consultants with core expertise in CFD Modeling. Over the last 10 years we have actively worked on using CFD to solve problems for various industries. A number of our senior consultants are Ex-ANSYS employees.
We have worked on similar problem to predict wind load under different wind conditions using CFD. We are based out of San Anotnio, Texas and will be happy to discuss more details with you. Please contact us info@tridiagonal.us for brief discussion. Please visit www.tridiagonal.com to find more information about our company.
Regards,
Chetan Dharmadhikari
chetanD is offline   Reply With Quote

Old   April 28, 2013, 05:27
Default
  #15
Member
 
Hannes
Join Date: Apr 2009
Location: Schleswig, Germany
Posts: 38
Rep Power: 16
Hannes_Kiel is on a distinguished road
If your still interested, drop me a note at hannes@fluidengsol.com. We've got ten years of aeordynamics background (CFD & experimental) in industrial and sports applications.

Best Regards,
Hannes Renzsch
FluidEngineeringSolutions
__________________
FluidEngineeringSolutions
Hannes_Kiel is offline   Reply With Quote

Old   July 25, 2013, 04:01
Default We are CFD Analysis Consulting Services Provider
  #16
Member
 
Mehul Patel - CFD Expert
Join Date: Jul 2013
Location: Ahmedabad
Posts: 41
Rep Power: 12
Mehul Patel is on a distinguished road
Hello,


HiTech CFD offers consulting services that apply to various spectrum of CFD analysis. Before starting your CFD Analysis project we create CAD geometry and develop an excellent quality mesh representation.


We are done many project for CFD modeling. We are happy to do your project. For more information and discuss more details, Please contact us info@hitechcfd.com or visit our CFD services http://www.hitechcfd.com/cfd-analysis-services.html
__________________
Thanks,
HiTech CFD - CFD Analysis Services Provider.
http://www.hitechcfd.com/
Mehul Patel is offline   Reply With Quote

Old   September 18, 2013, 11:36
Default
  #17
New Member
 
Faraj
Join Date: Feb 2010
Posts: 22
Rep Power: 16
Filankes is on a distinguished road
I am highly itnerested, and sent PM to you.
Filankes is offline   Reply With Quote

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cfd in building services abdul Main CFD Forum 0 August 14, 2002 06:02
CFD Events Calendar, Help Needed Jonas Larsson Main CFD Forum 9 April 9, 2002 10:37
What is the Better Way to Do CFD? John C. Chien Main CFD Forum 54 April 23, 2001 09:10
CFD Books Guide Pre-Release, Help Needed David & Jonas Main CFD Forum 1 March 2, 2000 03:57
Which is better to develop in-house CFD code or to buy a available CFD package. Tareq Al-shaalan Main CFD Forum 10 June 13, 1999 00:27


All times are GMT -4. The time now is 08:32.