|March 13, 2013, 04:44||
Finding someone to help with some OpenFOAM code for compressible, nonisothermal flow?
Join Date: Jan 2010
Posts: 28Rep Power: 8
I want to start using OpenFOAM.
I have looked into official training, but the kind of targeted training I would need (help setting up a specific problem) is expensive. I can probably get funding for this later on, but I first need to show that OpenFOAM can be useful for me. So for now, my budget is limited. I don't have time to start from scratch, unfortunately.
So my question is, does anyone know whether there are people (independent contractors) who provide help in setting up specific problems? What I need is an example of a compressible, non isothermal flow problem. I also need to know what OpenFOAM can do and what it can't as far as this type of problem. I'm pretty new to compressible, non-isothermal flow, so it would be great to get in touch with someone who is experienced in dealing with this type of problem specifically.
I would really appreciate any advice that anyone has. I have looked into this every few months and have never found anyone who does this sort of consulting independently, so am at a bit of a standstill. Thanks a lot for any help!
|December 4, 2014, 12:20||
non isothermal compressible flow with openFoam
dr marco guevara
Join Date: Jul 2014
Location: Bogota/Colombia And Rio Janeiro Brazil
Posts: 12Rep Power: 4
Hi, i can help you wherever you need with openFoam im an specialist and can work with you trough the distance my e/mail is firstname.lastname@example.org
|December 9, 2014, 08:43||
Mehul Patel - CFD Expert
Join Date: Jul 2013
Posts: 41Rep Power: 5
I am a CFD Consultant.
I will happy to assist you. You can contact with me at: email@example.com.
HiTech CFD - CFD Analysis Services Provider.
|December 15, 2014, 15:36||
Join Date: Jun 2014
Posts: 9Rep Power: 4
I have particular experience with the compressible solvers in OpenFOAM and have completed consultancy projects using them. I'd be happy to discuss your specific requirements and perform an initial simulation to demonstrate the capability cost effectively for you.
If you would like to talk more, please drop me a line at firstname.lastname@example.org.
|consultants, consulting, open foam, open foam tutorials, openfoam|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Specific OpenFOAM Code||pbhuter||OpenFOAM||13||June 30, 2012 19:06|
|OpenFOAM for subsurface flow, or coupling with a subsurface flow code?||chljl||OpenFOAM Running, Solving & CFD||0||February 14, 2012 20:38|
|Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64||wyldckat||OpenFOAM Announcements from Other Sources||3||September 8, 2010 06:25|
|is there any parallel code for the famous Lid Driven Cavity flow?||gholamghar||Main CFD Forum||0||August 1, 2010 01:55|
|CFD of turbulent flows||raj calay||Main CFD Forum||23||April 23, 1999 05:03|