|
[Sponsors] |
January 31, 2023, 03:36 |
boundary condition in Flow 3d
|
#1 |
New Member
Sushmita Lamichhane
Join Date: Jan 2023
Posts: 3
Rep Power: 3 |
I have to distribute my flow to intake and to under sluice, I tried boundary condition of specified pressure at fluid fraction 0 at outlet of under sluice and specified pressure at known fluid elevation at outlet of settling basin.
But the distribution is slightly less at settling basin and slightly more at under sluice.. How can I limit the volume of flow at outlet of undersluice.. Can I use volume flow rate with fluid fraction 0 at undersluice ? which boundary condition will work ? |
|
April 6, 2023, 13:35 |
For outsourcing
|
#2 |
New Member
Ali Riaz
Join Date: Mar 2016
Location: Pakistan
Posts: 22
Rep Power: 10 |
Kindly contact @ +92-336-8637493 or freelanceengineers007@gmail.com
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Inlet Boundary Condition for Open Channel type flow | Akshay_11235 | OpenFOAM Running, Solving & CFD | 10 | December 10, 2018 18:45 |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 06:21 |
Multiphase flow - incorrect velocity on inlet | Mike_Tom | CFX | 6 | September 29, 2016 02:27 |
Mass flow rate boundary condition with negative values | ashtonJ | CFX | 3 | November 26, 2014 06:21 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 05:05 |