URGENT-Simple Oil pump simulation using STAR CCM+
 

Hello Everyone,

I have a basic spur gear type OIL PUMP model which was created using CATIA software. This model has to be simulated using STAR CCM+ software to find PRESSURE and TEMPERATURE by studying the internal fluid flow from the inlet and outlet of the pump through GEAR TEETHS.

If anybody could do this work with a report explaining the steps involved in creating the simulation as soon as possible will be much appreciated.

With this helpful work, I can further simulate the pump model to get the optimum PRESSURE and TEMPERATURE by changing gear and other dimensions in the pump model.

I have attached model pictures in ppt file. Please check out and I request anyone who can do this work or can introduce to somebody regarding this to reply.

Best regards

Attached file exceeded the max file size. I can mail you the model.
Thank you

Hello Raghavendresh,

Hi-Tech outsourcing Services, an ISO certified company can help you simulate the model.
Please visit :http://bit.ly/Hi-Tech-CAE-FEA-CFD-Services
http://bit.ly/Hi-Tech-CFD-Case-Study

We will be happy to get associated with you by extending these services at cost effective rates.

Regards,
Hemen Shah
Hi-Tech Outsourcing Services
Cell: +91-898-053-3725 | Office: +91-794-000-3212 | Web: HiTechOS.com

Thanks for the response. Can you give your mail id so that I can mail the model file.

My mail id is hemen.shah@hitechos.com.

Regards
Hemen Shah.

Hello Race7373

In total I have experience of six years in CFD with STAR CCM+ FLUENT & CFX softwares.
I have been work on with STAR CCM with Moving dynamic mesh and overset mesh for around one and half year. Since overset mesh mesh was released in STAR.
I can certainly help you with motion build and overall pump analysis.
Mail me at udayrg@gmail.com

regards
Uday