Possible Freelance Opportunity

Bob_Forsberg · March 18, 2014, 15:54

My company is looking at the possibility of contracting some CFD work. We would prefer a Freelancer in the Seattle WA area but are open to anyone who is in the US.

The work involves air flow over a series of inlet and exhaust ports to determine the best shapes to verify the flow is going in the correct direction. There is the possibility we will want to model a heated air flow on the exhaust too.

Please PM me with your info and qualifications if interested.

Thanks,

Bob

aalzoubi06 · March 25, 2014, 10:25

I am interested in this work.

I have +10 years experience in running fluid flow problems to determine the optimum geometry configuration using commercial, open-source and self written computational codes using FVM and LBM.

You can see my CV from my webpage:
https://sites.google.com/site/ahmad6alzoubi/

Ahmad Al-Zoubi
Dresden, Germany

skeptik · March 31, 2014, 09:35

OpenFOAM CFD, DAKOTA optimisation tool.

Hold a master degree in aerospace and PhD in applied physics. I can send my CV.

If you're interested, please, do not hesitate to contact.

Ivanrips · June 2, 2014, 20:06

Hi;

I'm interested;

Here I attach several works that I have developed.

https://www.youtube.com/watch?v=g1P6...oVFhERbpQ0e0MI

https://www.youtube.com/watch?v=7RYvWKRpDII

Regards

March 18, 2014, 15:54	Possible Freelance Opportunity	#1
Bob_Forsberg New Member Bob Join Date: Mar 2014 Location: Seattle WA Posts: 1 Rep Power: 0	My company is looking at the possibility of contracting some CFD work. We would prefer a Freelancer in the Seattle WA area but are open to anyone who is in the US. The work involves air flow over a series of inlet and exhaust ports to determine the best shapes to verify the flow is going in the correct direction. There is the possibility we will want to model a heated air flow on the exhaust too. Please PM me with your info and qualifications if interested. Thanks, Bob Last edited by Bob_Forsberg; April 1, 2014 at 13:28.

March 31, 2014, 09:35		#3
skeptik Member Ilya Join Date: Dec 2011 Location: Russia Posts: 97 Blog Entries: 41 Rep Power: 14	OpenFOAM CFD, DAKOTA optimisation tool. Hold a master degree in aerospace and PhD in applied physics. I can send my CV. If you're interested, please, do not hesitate to contact. __________________ practice makes perfect

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
post graduate opportunity in CFD application in Military	teguhtf	Main CFD Forum	1	February 27, 2024 06:29
freelance work in Fluent	Fluent_guy	FLUENT	15	May 4, 2012 12:29
CFD Engineer opportunity	Nathan	Main CFD Forum	12	October 13, 2006 10:11
Idle Freelance CFD Consultant	Mark LeClair	Main CFD Forum	8	April 10, 2001 11:54
'Looking for freelance code Writer'	Mujahid S. Suhaeb	Main CFD Forum	2	December 2, 1999 21:16

March 25, 2014, 10:25		#2
aalzoubi06 New Member Ahmad Al-Zoubi Join Date: Nov 2013 Posts: 17 Rep Power: 12	I am interested in this work. I have +10 years experience in running fluid flow problems to determine the optimum geometry configuration using commercial, open-source and self written computational codes using FVM and LBM. You can see my CV from my webpage: https://sites.google.com/site/ahmad6alzoubi/ Ahmad Al-Zoubi Dresden, Germany

June 2, 2014, 20:06		#4
Ivanrips New Member Roger Iván Join Date: Jun 2009 Location: Perú Posts: 22 Rep Power: 16	Hi; I'm interested; Here I attach several works that I have developed. https://www.youtube.com/watch?v=g1P6...oVFhERbpQ0e0MI https://www.youtube.com/watch?v=7RYvWKRpDII Regards