modelling interphase mass transfer//

akaero · May 22, 2012, 03:08

Hello friends
i am using cfx-12 to model injection of fuel(jet-A) droplets into a domain(cylindrical and closed at both ends) which already contains air(at t=0 during initialisation and jet A mass fraction at t=0 is zero).Simultaneously i need to depict the conversion of these liquid fuel droplets into its gaseous form so that the domain contains liquid as well as gaseous fuel along with air as the simulation progresses.
For this I created a homogeneous binary mixture to specify the phase boundary between the two states of the fuel. but I don't see any option to specify the interphase mas transfer.

Kndly suggest how to proceed...

Also,please suggest how to create fuel injections in the domain.

ghorrocks · May 22, 2012, 06:24

Have you done the tutorial examples? While nothing is exactly like what you are modelling, ones like the Steam Jet, Coal Combustion and Spray Dryer are close enough to be worth a look.

May 22, 2012, 03:08	modelling interphase mass transfer//	#1
akaero New Member Amit Katoch Join Date: Sep 2011 Posts: 2 Rep Power: 0	Hello friends i am using cfx-12 to model injection of fuel(jet-A) droplets into a domain(cylindrical and closed at both ends) which already contains air(at t=0 during initialisation and jet A mass fraction at t=0 is zero).Simultaneously i need to depict the conversion of these liquid fuel droplets into its gaseous form so that the domain contains liquid as well as gaseous fuel along with air as the simulation progresses. For this I created a homogeneous binary mixture to specify the phase boundary between the two states of the fuel. but I don't see any option to specify the interphase mas transfer. Kndly suggest how to proceed... Also,please suggest how to create fuel injections in the domain.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass transfer in ANSYS	thipps	ANSYS	1	August 29, 2013 11:05
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
error message	cuteapathy	CFX	14	March 20, 2012 06:45
Source terms due to mass transfer in VOF model	ssamton	FLUENT	0	March 5, 2012 00:03
Vof, udf and mass transfer panel	Jay	FLUENT	1	March 15, 2005 00:29

May 22, 2012, 06:24		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Have you done the tutorial examples? While nothing is exactly like what you are modelling, ones like the Steam Jet, Coal Combustion and Spray Dryer are close enough to be worth a look.