CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Dynamic pressure from the total pressure specified

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 9, 2012, 06:18
Default Dynamic pressure from the total pressure specified
  #1
Senior Member
 
---------
Join Date: Oct 2010
Posts: 303
Rep Power: 17
saisanthoshm88 is on a distinguished road
Could some one please let me know how does CFX compute / separate the static pressure and dynamic pressure when a total pressure is specified at an inlet.

Because I suppose that in a problem where a total pressure is specified at the inlets and static pressure at outlets, the solver should some how have the information about the velocity so it is required that this information is extracted from the dynamic pressure part of the total pressure specified at the inlet.

So I'd like to know how CFX internally separates out the static pressure and the dynamic pressure from a specified total pressure.
__________________
Best regards,
Santhosh.
saisanthoshm88 is offline   Reply With Quote

Old   August 9, 2012, 07:13
Default
  #2
New Member
 
Sainath
Join Date: Mar 2012
Posts: 27
Rep Power: 14
sainath.s@tdps.co.in is on a distinguished road
The solver takes Static Pressure when there is an outflow and Total pressure when there is an inflow.

P abs = P ref + P stat


The static pressure is calculated in such a way that the boundary remains closed meaning there is no outflow at an inlet.


Secondly, Total pressure at inlet and Static pressure at outlet is very sensitive to the initial guess. For example in the case of turbo machines,when such a condition is used and no velocity magnitude is specified, then the solver takes half of the rotational angular velocity over the boundary as this is reasonable guess to calculate velocity triangles and results a magnitude of zero for stationary domains.

More information is provided in cfx solver modeling guide.
sainath.s@tdps.co.in is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Total Pressure BC or Porous Media? khoopes FLUENT 0 August 2, 2012 13:24
Total Pressure problem in a duct anveshkadimi FLUENT 0 July 20, 2012 14:19
Total pressure in CFX famarcfd CFX 0 June 17, 2011 11:33
Question about the dynamic pressure in the lifting/drag coefficients tenkio Main CFD Forum 1 May 17, 2011 12:23
Validation 12.1 vs 6.3, Difference in Reported Inlet Total Pressure jola FLUENT 1 May 5, 2011 15:33


All times are GMT -4. The time now is 01:29.