CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   How to read .msh file in ANSYS CFX workbench?? (http://www.cfd-online.com/Forums/cfx/108547-how-read-msh-file-ansys-cfx-workbench.html)

b.shuvayan October 26, 2012 02:55

How to read .msh file in ANSYS CFX workbench??
 
Hi everyone. :)
I am a novice when it comes to meshing in ansys so I really need your help. I recently was given a task to go through a problem which was solved by a person. He created a .msh file for a geometry. I need to open the file and I am suppose to learn from it but ANSYS can only import the file from workbench (and one cannot view what meshing techniques he has used). :eek:

Any help would be greatly appreciated.
Shuvayan Brahmachary

ghorrocks October 26, 2012 06:26

All I can recommend is to load the mesh file and have a look at how mesh has been generated, then try to reproduce it.

Also this post probably should be on the geometry and meshing forum.

Far October 28, 2012 02:34

In import mesh panel (first start the CFX-Pre) there is option of the fluent mesh (.msh). But be careful with the units.

b.shuvayan October 29, 2012 07:27

Thanks
 
Thanks for the help Glenn and Far. and Glenn I am kind of new to this site. will keep that in mind. Thanks/ Cheers :)


All times are GMT -4. The time now is 03:44.