CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Hey! i have some problem in CFX (http://www.cfd-online.com/Forums/cfx/109320-hey-i-have-some-problem-cfx.html)

kang142002 November 14, 2012 20:31

Hey! i have some problem in CFX
 
I was analysis in CFX about Centrifugal Compressor,

I used CFX Pre Turbo mode, when i was open Post, i have some proplem

Error is

[CFD-Post Application Error]

WARNING
No data exists for variable 'Mach Number in Stn Frame ACA on Spanwise Plot of M abs at TE Line' specified in object 'Series Spanwise Plot of M abs at TE'\'Spanwise Plot of M abs at TE'.

ERROR
Colour variable 'Mach Number in Stn Frame' does not exist.

-------------------------------------------------------------
Anyone know that error? Help me~

ghorrocks November 14, 2012 22:06

If you have a problem with the tutorial it is almost always because you missed a step. Redo the tutorial from the beginning and make sure you do not miss anything.

But before you do - check you have access to the rotating frame of reference license. Basic solver licenses do not have this capability. You either need a RFR license or a full capability license.

kang142002 November 14, 2012 23:28

Quote:

Originally Posted by ghorrocks (Post 392177)
If you have a problem with the tutorial it is almost always because you missed a step. Redo the tutorial from the beginning and make sure you do not miss anything.

But before you do - check you have access to the rotating frame of reference license. Basic solver licenses do not have this capability. You either need a RFR license or a full capability license.


Thank you so much !

I will check again


All times are GMT -4. The time now is 04:39.