Integration Matlab - Simulink - CFX

hinca · November 30, 2012, 07:49

I would like to know how to integrate MATLAB - SIMULINK in analysis of CFX, as input function of time for a transient simulation.

ghorrocks · December 1, 2012, 04:16

Do you want matlab to set up runs and start them off and possibly read results out (easy)? Or do you want to couple matlab to CFX during a simulation (hard)?

hinca · December 1, 2012, 13:23

thanks ghorrocks
I want matlab handle the input air velocity when the simulation is running depending on the temperature at a point, or if possible one can make from the same CEL programs of CFX.

ghorrocks · December 1, 2012, 14:46

To do this you should try to implement it in CEL first. That will be far easier if it is possible. If not, and you have to link to matlab you have two choices: You can use user fortran and write your own code to send data out of CFX and wait until updates come back, or use third-party coupling code like MPCCI.

November 30, 2012, 07:49	Integration Matlab - Simulink - CFX	#1
hinca New Member jhon fredy hincapie Join Date: Sep 2011 Posts: 13 Rep Power: 14	I would like to know how to integrate MATLAB - SIMULINK in analysis of CFX, as input function of time for a transient simulation.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Importing solutions in CFX.	Alphonso	CFX	1	August 1, 2008 14:01
Matlab & CFX	Meri	CFX	1	March 16, 2006 00:39
CFX 7.1 and Matlab	Juan G.	CFX	1	March 5, 2006 21:37
CFX & MatLab	Walid	CFX	4	March 8, 2005 16:30
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 04:07

December 1, 2012, 04:16		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Do you want matlab to set up runs and start them off and possibly read results out (easy)? Or do you want to couple matlab to CFX during a simulation (hard)?

December 1, 2012, 13:23		#3
hinca New Member jhon fredy hincapie Join Date: Sep 2011 Posts: 13 Rep Power: 14	thanks ghorrocks I want matlab handle the input air velocity when the simulation is running depending on the temperature at a point, or if possible one can make from the same CEL programs of CFX.

December 1, 2012, 14:46		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	To do this you should try to implement it in CEL first. That will be far easier if it is possible. If not, and you have to link to matlab you have two choices: You can use user fortran and write your own code to send data out of CFX and wait until updates come back, or use third-party coupling code like MPCCI.