Urgent,Shock tube simulation

wind.cfd · January 28, 2013, 20:53

Hello,
I want to simulate a shock tube problem in CFX, which the domain is initially divided into tow sub domain and each domain has two different gases with different states of pressure and temperature . At time t=0 , the diaphragm is removed and gases starts to interact. I have a problem in initialization of these two different domains. I would be appreciated if someone help me?

Regards

ghorrocks · January 29, 2013, 17:06

Can you post an image of the geometry? Is it a simple pipe with closed ends, or does it have some other detail.

This does not sound like a multi domain problem to me. Should be able to do it with a single domain with careful specification of initial conditions.

January 28, 2013, 20:53	Urgent,Shock tube simulation	#1
wind.cfd New Member cfd Join Date: Oct 2011 Posts: 17 Rep Power: 14	Hello, I want to simulate a shock tube problem in CFX, which the domain is initially divided into tow sub domain and each domain has two different gases with different states of pressure and temperature . At time t=0 , the diaphragm is removed and gases starts to interact. I have a problem in initialization of these two different domains. I would be appreciated if someone help me? Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shock tube simulation in Fluent	Vinoo_P	FLUENT	28	September 6, 2018 00:21
What is best mesh for cylinder tube?	olivia	FLUENT	7	January 16, 2014 05:55
[OpenFOAM] Tube filter in Paraview	werweisswas	ParaView	0	December 10, 2012 06:18
nucleate boiling simulation in CFX	Anil	CFX	3	August 25, 2010 14:18
vof simulation...magnetic fluid pressure fields.	Souviktor	FLUENT	0	May 22, 2010 02:19

January 29, 2013, 17:06		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Can you post an image of the geometry? Is it a simple pipe with closed ends, or does it have some other detail. This does not sound like a multi domain problem to me. Should be able to do it with a single domain with careful specification of initial conditions.