CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   problem in two way fsi (https://www.cfd-online.com/Forums/cfx/113090-problem-two-way-fsi.html)

kmgraju February 12, 2013 06:08

problem in two way fsi
 
1 Attachment(s)
Dear friend
I am doing two way fsi.
analysis : A Pulsatile flow through artery .
When the simulation is running, after few iteration in ANSYS field it comes out with error.
I suspect the problem with time step control in ANSYS setup.

Please find the attached step control setup . if any mistakes please help me to rectify

Note: in the cfx setup, coupling time duration 1 s coupling time steps 0.005s.

Thank you for your kind attention

Regards

Govind


All times are GMT -4. The time now is 10:48.