CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   volute meshing (http://www.cfd-online.com/Forums/cfx/115833-volute-meshing.html)

wadoud31 April 8, 2013 04:58

volute meshing
 
2 Attachment(s)
i have a problem with meshing hexa or tetra of volute.

Lance April 8, 2013 07:25

Yes, you do have a problem.

http://www.cfd-online.com/Forums/cfx...ease-read.html

wadoud31 April 9, 2013 06:54

volute meshing
 
want generate a hex and tetra meshing of volute withe a good quality
please i need how i can do it
thank you

Lance April 9, 2013 07:29

From the link in the previous post:
Quote:

Originally Posted by ghorrocks (Post 221975)
This forum is to discuss issues about the CFD software CFX. Other CFD software, including issues regarding geometry and mesh generation, should be posted to forums relevant to that software. (Here is the link to the ANSYS Geometry and Meshing forum http://www.cfd-online.com/Forums/ansys-meshing/)

Have you read the documentation?

Have you done the tutorial problems?

Include enough detail in your question


wadoud31 April 13, 2013 04:46

generate a hex grid for volute
 
I have generated a hex mesh of the volute but I have in the area of cut water a problem and for tetra mesh I could not generate a good mesh.
I want to generate a hex grid and another tetra mesh with prism with good quality


All times are GMT -4. The time now is 12:53.