CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

2 way fsi

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 14, 2013, 01:09
Default 2 way fsi
  #1
New Member
 
Kishore
Join Date: Mar 2013
Posts: 20
Rep Power: 13
kish is on a distinguished road
Dear all

I am trying 2 way FSI problem. I am modelling a fluid flow through an artery in addition to that I want to introduce a guide wire along the axis. I assume the wall of the artery is rigid and the guide wire is stainless steel (0.5 mm dia) .I extended the guide wire until the middle of the fluid domain.

I have lots of doubt in boundary conditions and settings. I want to clarify my doubts from the people who are expert in the 2 way fsi.


The boundary conditions I set in the ANSYS
1. One end of the wire, I set fixed boundary.

2. the other end face and the wall of the guide wire which which are in contact with fluid . So i set fluid solid interface ( I have in dilemma the end of the face should be friction less support)( Please any one clarify)

3. I set large deflection "off" instead of "on".( Please clarify)

The boundary conditions I set in the CFX

I set mesh motion unspecified in all the boundary conditions including wall side please clarify

( Note: The solver is running without error so for)

Thank you


Regards

Kish
kish is offline   Reply With Quote

Old   April 16, 2013, 04:28
Default
  #2
Senior Member
 
Matthias Voß
Join Date: Mar 2009
Location: Berlin, Germany
Posts: 449
Rep Power: 20
mvoss is on a distinguished road
could you post a picture?
Mesh motion should be stationary @end of wire ... since it is fixed?!
mvoss is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FSI: How to transfer static pressure from fluent to ANSYS momo_sjx FLUENT 0 October 9, 2012 14:37
BCs in an FSI simulation of a flexble pipe vivekcfd OpenFOAM 10 January 8, 2010 05:14
fsi sun Siemens 8 January 20, 2009 00:17
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 05:08
FSI on a Rotating Structural Model drgolf CFX 9 August 30, 2007 13:08


All times are GMT -4. The time now is 19:33.