CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

TBR Fourier Transformation Method

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 26, 2013, 15:11
Default TBR Fourier Transformation Method
  #1
New Member
 
Join Date: Apr 2013
Posts: 3
Rep Power: 4
Eschek is on a distinguished road
Hello to all,

i calculate a Rotor Stator passage in TBR Profile Transformation and it works.
If i try it in TBR Fourier Transformation Method it doesn't work.

Error: In Analysis 'Flow Analysis 1' - Fourier Transformation 'Fourier Transformation 2': The relative velocity between the domain and the signal must not be zero.

So i have to put a coordinante frame? I don't get it.

Have somebody a Tutorial to Typical Transient Rotor Stator Simulation using Fourier Transformation like in Modeling Guide - 6.8.1 Case 1: Transient Rotor Stator Single Stage?

In the Tutorials from the help are two examples, but only for an Inlet Disturbance Case and a Method for a Blade Flutter Case.


Thx and regards

Eschek
Eschek is offline   Reply With Quote

Old   May 2, 2013, 14:23
Red face
  #2
New Member
 
Join Date: Apr 2013
Posts: 3
Rep Power: 4
Eschek is on a distinguished road
Some additional informations:

I choose Transient Blade Row Model: Fourier Transformation;
And i add a new item with a default name.
And after that I have in Option only the two possibilites:
"Rotational Flow Boundary Disturbance" and "Blade Flutter", but no "Rotor Stator" option.

In the Manual "CFX-PRe User's Guide - Chapter 22.2" stands:

This option can be applied only when the disturbance originates from a domain interface that uses the Transient Rotor Stator frame change/mixing model.

But with this help i can not fix it.

Regards

Eschek
Eschek is offline   Reply With Quote

Old   May 16, 2013, 16:12
Default
  #3
New Member
 
Join Date: Apr 2013
Posts: 3
Rep Power: 4
Eschek is on a distinguished road
Hello,

to calculate the single stage in Fourier-Transformation you have to enable the Beta-Features in ANSYS 14.5

Regards
Eschek is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
discretizer - gmshToFoam Andyjoe Open Source Meshers: Gmsh, Netgen, CGNS, ... 13 March 14, 2012 05:35
De-aliased Fourier spectral method TTY Main CFD Forum 0 November 10, 2010 17:55
Code for most powerfull FDV Method D.S.Nasan Main CFD Forum 6 September 4, 2008 02:08
Fast Fourier Transformation mstein Main CFD Forum 5 May 16, 2004 11:20


All times are GMT -4. The time now is 15:31.