CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

one face turn to be two in pre

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 16, 2013, 05:04
Default one face turn to be two in pre
  #1
Member
 
leo
Join Date: Jun 2012
Posts: 98
Rep Power: 13
sjtusyc is on a distinguished road
I am simulating the flow field of a large room. There are several pipes in the room. Air flows from the large room to the outer environment through pipes.

I try to start with an easy model.
First i model the room and then i direct model one pipe in the room through UG.

When meshing, I creat two material bodies, one for the pipe, and the other for the big room.

And i named the the inlet face of the pipe which connects the big room as IN.

But when i load the mesh in the CFX-pre, I found the CFX named the IN as
IN-a,IN-b.

Why will that happen?
Is it OK?
sjtusyc is offline   Reply With Quote

Old   May 16, 2013, 05:36
Default
  #2
Senior Member
 
OJ
Join Date: Apr 2012
Location: United Kindom
Posts: 473
Rep Power: 19
oj.bulmer will become famous soon enough
This is probably because the IN surface is shared by two domains (materials) here - pipe and room. Hence a and b sides belong to the two domains meeting at your surface.

As long as both are same materials, ie air, you should be fine.

OJ
oj.bulmer is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 08:20.