CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

cfx solve error and stop solve and fail solve

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 24, 2014, 05:01
Default cfx solve error and stop solve and fail solve
  #1
New Member
 
mahdi
Join Date: May 2014
Posts: 14
Rep Power: 11
mahdidelfan is on a distinguished road
hi
my domain is a quarter of the original geometry of supersonic wind tunnel.wind tunnel mach number is 1.8 . in my domain Using tow symmetry boundary conditions and tow wall boundary condition and a boundary condition input and an output boundary condition my simulation cfx Boundary conditions is:
ANALYSIS TYPE:
Option = Steady State
TURBULENCE MODEL:
Option = k epsilon
BOUNDARY: inlet
FLOW REGIME:
Option = Subsonic
END
HEAT TRANSFER:
Option = Static Temperature
Static Temperature = 300 [K]
END
MASS AND MOMENTUM:
Option = Total Pressure
Relative Pressure = 1.8 [bar]
TURBULENCE:
Option = Medium Intensity and Eddy Viscosity Ratio
END
BOUNDARY: outlet
Boundary Type = OPENING
Location = outlet
FLOW REGIME:
Option = Subsonic
END
HEAT TRANSFER:
Opening Temperature = 300 [K]
Option = Opening Temperature
END
MASS AND MOMENTUM:
Option = Opening Pressure and Direction
Relative Pressure = 84000 [Pa]
END
TURBULENCE:
Option = Medium Intensity and Eddy Viscosity Ratio
END


wall
HEAT TRANSFER:
Option = Adiabatic
END
MASS AND MOMENTUM:
Option = No Slip Wall
END
WALL ROUGHNESS:
Option = Smooth Wall
END

After 1600 itration cfx solver stop solution .
The error is in the attached image:
Please Help me, please
Thanks for all
Attached Images
File Type: jpg 2014-06-24_092603.jpg (19.0 KB, 7 views)
File Type: jpg 2014-06-24_091237.jpg (55.9 KB, 8 views)
File Type: jpg 2014-06-24_092237.jpg (59.0 KB, 9 views)
File Type: jpg 2014-06-24_092318.jpg (71.7 KB, 10 views)
File Type: jpg 2014-06-24_092427.jpg (23.5 KB, 5 views)
mahdidelfan is offline   Reply With Quote

Old   June 24, 2014, 20:10
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Looks like an FAQ:
http://www.cfd-online.com/Wiki/Ansys...gence_criteria

and

http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F
ghorrocks is offline   Reply With Quote

Old   June 27, 2014, 02:29
Default
  #3
Senior Member
 
Martin_Sz's Avatar
 
Marcin
Join Date: May 2014
Location: Poland, Swiebodzin
Posts: 229
Rep Power: 12
Martin_Sz is on a distinguished road
try to change the turbulence model to sst.
If this doesnt work try to change opening to an outlet with static pressure.
Martin_Sz is offline   Reply With Quote

Old   July 3, 2014, 02:55
Default
  #4
New Member
 
mahdi
Join Date: May 2014
Posts: 14
Rep Power: 11
mahdidelfan is on a distinguished road
help me .help me
mahdidelfan is offline   Reply With Quote

Old   July 3, 2014, 03:01
Default
  #5
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
We already have. If you do not respond to the suggestions already here then we are not going to bother suggesting anything else.
ghorrocks is offline   Reply With Quote

Reply

Tags
cfx solver error

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:41.