R245fa modelling

enuano · June 15, 2013, 07:49

Hi there!

My name is Edu and I'm writting my master's thesis about an ORC cycle.
Have you ever modelled R245fa in Ansys CFX? First, I want to try it considering it to behave like an ideal gas, because the pressures of my expantion are very low! I would like to know if the Peng Robinson refrigerant option is a good one? and if it's the case, wet or dry?

I also calculated a Cp of 1156 J/kgK!

ghorrocks · June 16, 2013, 06:30

Only you can answer that question as what you are doing with the fluid and the accuracy you require will determine which fluid model is required.

June 15, 2013, 07:49	R245fa modelling	#1
enuano New Member Gato Lopez Join Date: Jun 2013 Location: Stuttgart Posts: 8 Rep Power: 12	Hi there! My name is Edu and I'm writting my master's thesis about an ORC cycle. Have you ever modelled R245fa in Ansys CFX? First, I want to try it considering it to behave like an ideal gas, because the pressures of my expantion are very low! I would like to know if the Peng Robinson refrigerant option is a good one? and if it's the case, wet or dry? I also calculated a Cp of 1156 J/kgK!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error message	cuteapathy	CFX	14	March 20, 2012 06:45
Modelling unsteady 2D aerofoil drag	xlxc34	Main CFD Forum	0	June 24, 2011 04:42
Advice on multi-phase flow modelling	Martin	Main CFD Forum	3	October 14, 2008 05:16
Unsteady modelling technique?	Carlos	FLUENT	0	September 26, 2008 11:37
how to ensure that your modelling is correct	rvndr	Main CFD Forum	7	March 1, 2004 12:21

June 16, 2013, 06:30		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Only you can answer that question as what you are doing with the fluid and the accuracy you require will determine which fluid model is required.