CFX post

bitak · August 28, 2013, 03:50

Hello.
I simulated a 3d pipe in CFX
The solver run finished successfully (with all time step).
but when I open the cfx post, I can't see results for different tyime step.

bitak · August 28, 2013, 03:55

At first I set up CFX solver for FSI problem then I change it (I removed the APDL Ansys) and only solved cfx solver for 3d pipe flow. the run finished successfully.
but I can not see result in CFX post.

ERROR
Variable 'Total Mesh Displacement' does not exist on 'wall'.
ERROR
Variable 'Total Mesh Displacement' does not exist on 'wall'.

SEVERE
An attempt to recover from a previous error has failed.
The application is likely to be in an unstable state.

I did solver setup successfully.
what i do now?
plz help me...

ghorrocks · August 28, 2013, 06:36

By default the results file only contains the result at the end of the simulation. If you want any intermediate time steps you have to add them in the output options, under results file.

August 28, 2013, 03:50	CFX post	#1
bitak Member bitak Join Date: Jul 2009 Posts: 56 Rep Power: 16	Hello. I simulated a 3d pipe in CFX The solver run finished successfully (with all time step). but when I open the cfx post, I can't see results for different tyime step.

August 28, 2013, 03:55	cfx post without results	#2
bitak Member bitak Join Date: Jul 2009 Posts: 56 Rep Power: 16	At first I set up CFX solver for FSI problem then I change it (I removed the APDL Ansys) and only solved cfx solver for 3d pipe flow. the run finished successfully. but I can not see result in CFX post. ERROR Variable 'Total Mesh Displacement' does not exist on 'wall'. ERROR Variable 'Total Mesh Displacement' does not exist on 'wall'. SEVERE An attempt to recover from a previous error has failed. The application is likely to be in an unstable state. I did solver setup successfully. what i do now? plz help me...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to get reynolds stress values in POST CFX	syler3321	CFX	6	January 1, 2017 07:54
CFX post legend modification	mactech001	CFX	3	December 25, 2011 22:12
CFX post - graph	kmgraju	CFX	0	July 22, 2010 11:59
Chart Generation in CFX Post	Vadim Baines-Jones	CFX	2	August 28, 2007 09:14
Tecplot for CFX post processing	pantangi goud	CFX	2	August 24, 2005 16:42

August 28, 2013, 06:36		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	By default the results file only contains the result at the end of the simulation. If you want any intermediate time steps you have to add them in the output options, under results file.