CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

how to obtain depth?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 7, 2013, 07:29
Default how to obtain depth?
  #1
Senior Member
 
hamidi
Join Date: Sep 2012
Posts: 150
Rep Power: 4
hamidciv is on a distinguished road
i am working bucket spillway, My goal is that the obtain the depth of the curvature bucket
figure is attached
please help me
bucket spillway.jpg
hamidciv is offline   Reply With Quote

Old   September 8, 2013, 02:11
Default
  #2
Senior Member
 
hmasenger's Avatar
 
hamed
Join Date: Apr 2009
Posts: 148
Rep Power: 8
hmasenger is on a distinguished road
pleas make it clear.do you mean water depth ?then you should solve a free surface model (multiphase model) take a look at CFX tutorials.i don't know what exactly you are looking for..
hmasenger is offline   Reply With Quote

Old   September 8, 2013, 04:39
Default
  #3
Senior Member
 
hamidi
Join Date: Sep 2012
Posts: 150
Rep Power: 4
hamidciv is on a distinguished road
hello hmasenger
yes , my purpose obtaining water depth in The shape of the curve is,
Which is an arc of circle
I've got depth and velocity values curve figure ,
But the depth values ​​to obtain a problem because I can not take direct

I'm very grateful for your help
hamidciv is offline   Reply With Quote

Old   September 8, 2013, 04:57
Default
  #4
Senior Member
 
hmasenger's Avatar
 
hamed
Join Date: Apr 2009
Posts: 148
Rep Power: 8
hmasenger is on a distinguished road
CFX tutorials..look for free surface models.
hmasenger is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interim Depth variable EvanT FLOW-3D 1 June 4, 2013 16:38
Obtain the processor id in parallel code albcem OpenFOAM Programming & Development 4 August 7, 2009 13:35
How did I set a discharge or depth curve at inflow boundary? (open channel problem) Andy Chen FLUENT 0 June 29, 2009 10:11
How to obtain the same volume of mesh Dome CFX 0 April 22, 2005 13:32
Depth for 2D problems Jamcam FLUENT 8 February 5, 2004 05:51


All times are GMT -4. The time now is 17:48.