CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Simulation in CFX about CRF

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 25, 2013, 04:58
Default Simulation in CFX about CRF
  #1
Huo
New Member
 
Ch
Join Date: Nov 2012
Posts: 5
Rep Power: 4
Huo is on a distinguished road
Dear friends,

I have a very robust design of a contra-rotating fan, now I need to validate this design and find the problems. However, after i generated the mesh in turbogrid and set up all the parameters in pre-CFX, I always got the problem "floating point exception: overflow". I did a lot of changes, such as improving the mesh, adding the good initial conditions, decreasing the timestep and changing the turbulence model to SST. However, I still can not get proper convergent results. Can anybody help me to check the case? Here I can not attach the .def and .cfx files since it is too large. If there is sombody who can help me, I will send you those files by email.

Thanks very much!
Huo is offline   Reply With Quote

Old   September 25, 2013, 07:19
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 10,824
Rep Power: 85
ghorrocks has a spectacular aura aboutghorrocks has a spectacular aura aboutghorrocks has a spectacular aura about
Do not post the def or cfx files, they are too large and nobody has time to look at them anyway.

Please post an image of what you are modelling, and image which shows the mesh in key parts of the simulation, and attach your CCL (not the whole output file).
ghorrocks is offline   Reply With Quote

Old   September 26, 2013, 22:26
Default
  #3
New Member
 
CZL
Join Date: Sep 2013
Posts: 6
Rep Power: 3
qingwa is on a distinguished road
We are in the same boat.
qingwa is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blast simulation with ANSYS CFX or FLOW-3D etc. xji ANSYS 0 November 30, 2012 17:57
CFX vs FLUENT for particle tracking simulation iman ANSYS 2 August 31, 2012 20:34
nucleate boiling simulation in CFX Anil CFX 3 August 25, 2010 14:18
2D simulation - ICEM meshing for CFX question Ben Makhal CFX 5 April 11, 2007 08:44
Simulation of turbine cascade in CFX. Jonas Pedro Caumo CFX 0 December 9, 2006 14:54


All times are GMT -4. The time now is 18:37.