CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Error while using profile data in transient analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 11, 2013, 02:32
Default Error while using profile data in transient analysis
  #1
New Member
 
ranjith
Join Date: Dec 2009
Posts: 19
Rep Power: 7
ranjith is on a distinguished road
Hi,
I am trying to simulate transient flow through a valve. For this I am using profile data for inlet velocity. I am getting the following error in CFX solver

Details of error:-
Details of error:-
----------------
----------------
Error detected by routine MAKDAT
Error detected by routine MAKDAT
Illegal data area length CDANAM = NCOMPT CDTYPE = INTR ISIZE = 0
Illegal data area length CDANAM = NCOMPT CDTYPE = INTR ISIZE = 0
CRESLT = SIZE
CRESLT = SIZE


Current Directory : /INTERP/SOLUTION/DST/VX
Current Directory : /INTERP/SOLUTION/DST/VX

+================================================= ===================+
| ****** PROBLEM REPORT ****** |
|--------------------------------------------------------------------|
| Subsystem: Input and Output |
| Subroutine name: ErrAction |
| Severity level: Fatal Error |
| Error message number: 001100279 |
|--------------------------------------------------------------------|
| Message: |
| |
| Stopped in routine MEMERR |
| |
| |
| |
| |
| |
+===============================



I havent come across this error to date . If somebody is aware of this error please help

Ranjith
ranjith is offline   Reply With Quote

Old   November 12, 2013, 10:25
Default
  #2
Member
 
Join Date: Feb 2011
Posts: 85
Rep Power: 6
Antanas is on a distinguished road
Quote:
Originally Posted by ranjith View Post
Hi,
I am trying to simulate transient flow through a valve. For this I am using profile data for inlet velocity. I am getting the following error in CFX solver

Details of error:-
Details of error:-
----------------
----------------
Error detected by routine MAKDAT
Error detected by routine MAKDAT
Illegal data area length CDANAM = NCOMPT CDTYPE = INTR ISIZE = 0
Illegal data area length CDANAM = NCOMPT CDTYPE = INTR ISIZE = 0
CRESLT = SIZE
CRESLT = SIZE


Current Directory : /INTERP/SOLUTION/DST/VX
Current Directory : /INTERP/SOLUTION/DST/VX

+================================================= ===================+
| ****** PROBLEM REPORT ****** |
|--------------------------------------------------------------------|
| Subsystem: Input and Output |
| Subroutine name: ErrAction |
| Severity level: Fatal Error |
| Error message number: 001100279 |
|--------------------------------------------------------------------|
| Message: |
| |
| Stopped in routine MEMERR |
| |
| |
| |
| |
| |
+===============================



I havent come across this error to date . If somebody is aware of this error please help

Ranjith
Please provide more info. How do you initialize and use profile? Do you use fortran routine?
Antanas is offline   Reply With Quote

Old   November 12, 2013, 23:52
Default
  #3
New Member
 
ranjith
Join Date: Dec 2009
Posts: 19
Rep Power: 7
ranjith is on a distinguished road
Antanas,
Thankyou for your reply. I am using a csv file for the profile data. Anyway I have got the problem sorted. I went for a finer mesh and the simulation is running.

Ranjith
ranjith is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
transient analysis _porous medium shaswat CFX 4 January 25, 2012 01:18
Transient profile boundary conditions dladd CFX 8 January 9, 2012 05:45
Profile Boundary Condition Data blackbody CFX 3 March 25, 2010 08:50
Writing profile data at transient heat transfer analysis Ama FLUENT 0 July 5, 2009 07:35
How to input transient pressure data as BC in pre? User CFX 4 February 6, 2006 02:15


All times are GMT -4. The time now is 17:26.