CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   stirred tank using MRF (http://www.cfd-online.com/Forums/cfx/126982-stirred-tank-using-mrf.html)

gurpreet89 November 30, 2013 14:50

stirred tank using MRF
 
hi friends,
i have simulated the stirred tank using MRF but i am not able to extract some quantitative data from my simulations. i want to plot a curve between mean velocities(dimensionless) and radial distance as we move from bottom of the tank to top.I am using chart function in cfd-post but i am not very much clear.
plz help:confused:

ghorrocks December 1, 2013 05:31

I do not understand what you want to plot. The mean velocity - averaged over what?

gurpreet89 December 1, 2013 05:58

i want to plot mean radial velocity (Ur/Utip) at various radial positions in stirred tank.

ghorrocks December 1, 2013 06:09

You can set up planes at the different heights, work out the averaged velocity on them and plot them. The method is a bit nasty as you have the generate lots of planes, but I cannot think of a way of doing this nicely.


All times are GMT -4. The time now is 17:49.