CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

create a chart using ansys CFX to analyze flow characteristics

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 18, 2014, 02:07
Default create a chart using ansys CFX to analyze flow characteristics
  #1
New Member
 
shakey
Join Date: Jan 2014
Posts: 3
Rep Power: 4
shakey is on a distinguished road
i have designed a cylinder tube with length of 120mm and diameter of 3mm. There is a rectangle restriction with height of 1mm at the distance of 60mm from the inlet. I have completed untill cfx-solver step. however i am confused on how to create a chart for example to analyze velocity distribution after the restriction (70mm from the inlet). I have tried to follow guidelines from the ansys tutorial but still failed to do so. Can someone advice the correct method to generate the chart? TQ
shakey is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Flat plate analysis in cfx hamed.majeed CFX 14 February 4, 2015 08:07
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
ANSYS CFX: Produce swirling flow using cylindrical components neilduffy1024 CFX 4 August 7, 2013 08:00
Different flow patterns in CFX and Fluent avi@lpsc FLUENT 4 April 8, 2012 06:12
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 01:07


All times are GMT -4. The time now is 17:15.