Axial Velocity Contour in non-planar bend

omidmd · March 16, 2014, 06:04

Hi guys,

I simulated a fluid flow in a non-planar bend in which the inlet and outlet surfaces are not placed in the same plane. The bend consists of two 90 degree bends. I would like to see axial velocity in different sections along the pipe in CFS-Post.
I could have seen total velocity contour, but my problem is in plotting axial velocity. The axial vector is not along coordinates, but I have the normal vector at each plane.
Do you have any idea how to get axial velocity contour via CFD-Post?

Thanks,
Omid.

ghorrocks · March 16, 2014, 17:30

You could define a local coordinate frame at each point to get the axial component.

1988 · August 4, 2014, 13:04

hi guys
could you please explain more what I have to do to plot an axial contours in non planar 3D curved pipe in different sections?

March 16, 2014, 06:04	Axial Velocity Contour in non-planar bend	#1
omidmd New Member Omid Join Date: Jan 2012 Posts: 4 Rep Power: 14	Hi guys, I simulated a fluid flow in a non-planar bend in which the inlet and outlet surfaces are not placed in the same plane. The bend consists of two 90 degree bends. I would like to see axial velocity in different sections along the pipe in CFS-Post. I could have seen total velocity contour, but my problem is in plotting axial velocity. The axial vector is not along coordinates, but I have the normal vector at each plane. Do you have any idea how to get axial velocity contour via CFD-Post? Thanks, Omid.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axial Velocity Contour in non-planar bend	omidmd	FLUENT	2	October 7, 2014 14:22
How to draw velocity contours along the bend of U-pipe	mariam.sara	FLUENT	1	March 20, 2011 08:12
Axial velocity problem	clueless	Main CFD Forum	0	May 15, 2009 04:01
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11
velocity profile in a 90 degrees bend	Tim	Main CFD Forum	6	June 18, 1999 02:58

March 16, 2014, 17:30		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	You could define a local coordinate frame at each point to get the axial component.

August 4, 2014, 13:04		#3
1988 Senior Member Ali reza Join Date: Mar 2014 Posts: 110 Rep Power: 12	hi guys could you please explain more what I have to do to plot an axial contours in non planar 3D curved pipe in different sections?