CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   CFX-Post processing (http://www.cfd-online.com/Forums/cfx/133837-cfx-post-processing.html)

Saima April 21, 2014 11:23

CFX-Post processing
 
Hello Guys,

I am doing flow analysis of a blade in CFX and wanted to plot Mach contour and velocity profile on blade surface in span wise direction.

Guide me how to do that in CFX post processing?

Regards,

ghorrocks April 22, 2014 06:16

Of course the velocity is zero on the blade surface, and so is the Mach number due to the no slip condition. Can you explain what you are trying to do better?

Saima April 22, 2014 15:35

I have created a user surface by offsetting the blade a mm on CFX-post. Then I am able to draw Mach contours.


Quote:

Originally Posted by ghorrocks (Post 487479)
Of course the velocity is zero on the blade surface, and so is the Mach number due to the no slip condition. Can you explain what you are trying to do better?



All times are GMT -4. The time now is 16:01.